Skip to main content

Reply to "Wiring a signal light to Lionel FasTrack Remote Switch"

1, When you apply the 12V DC to the module, does the LED in the center of the module light up indicating power is applied?

2. Is the plug-on/press-on jumper on the left 2 (of 3) pins as indicated in my photo "jumper set to H"?

3. Does the relay ever "click" on at all?  When the relay turns on, the 2nd LED near the lower left of module should turn on.

4. Is the "-" wire of the 12V DC supply tied to the black wire of the FT turnout (i.e., the outer-rail of the layout)?

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×