Skip to main content

Reply to "Wiring American Flyer K325"

Well, today I removed the boiler shell so I could inspect the wiring to the motor and field. While I had things disassembled I removed and cleaned the armature and everything inside. The wiring looked pristine and was correct. After reassembling I did find I had reversed 2 wires from the reverse unit to the 4-pin plug but it made no difference. The loco still runs backward fine but will not run in the other direction. Perhaps I need to replace the finger units with new ones? The mystery remains.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×