John Rowlen posted:I again recommend you follow Atlas O instructions and create a series of short isolated rails through this section of track. Hook the isolated rail to "din" on the board for each signal.
If using Atlas O track, it allows you to power both outside rails on sections between the isolated rail tracks.
I am using Legacy that is helped by a clear signal through the rails.
Sincerely, John Rowlen
John,
My original post stated that I wanted to have two Atlas signals both turn red at the same time, regardless of which end of the block you entered from. So this is just one block with a signal at each end. The way that Atlas engineered these signals does not allow for this reguardless if itads or connecting to the insulated rail. Since there is only one block the two din connections are basically tied together, and the signals both go to red and will stay that way. The isolation of the rail does not come into play since both din connections go to the shared rail.
Ed
