Hi John: I have the loco all buttoned up with lights/smoke/Railsounds all working and the locomotive has awesome speed control the Lionel unit did not have. The only deletion I did was the flickering firebox-I could add that later but it wasn't a big priority.
My one question I have left concerns programming the Cruise"M"; per the manual I set feature code as "4" which is steam with smoke. I checked settings in my CabII for the engine and have it set for "steam/TMCC/Railsounds". I only ask if that is the preferred set-up as the top-end on my engine is reduced from "normal" by quite a bit, i.e. my CabII speed bar can be showing "28" and the engine is running more like a "10". Does ERR prefer operating as a "CabI" controller?
