Skip to main content

Reply to "Wiring the ERR AC Commander in a "later" PulMor motor"

You certainly need a good frame ground to the motor and the AC Commander, other than that, the other three wires are all that's required to run the motor.  I frequently briefly test the motor after wiring just the five wires on that end of the board before completing the installation.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×