Skip to main content

Reply to "Wiring tips/help"

You must power up Fixed 1 on the input side just to power up the the TIU. You must do this even if you just want outputs on the variable channels. Your other option is running an auxiliary power supply that plugs into the side of the TIU. These are available from Radio Shack and will power up all 4 channels. The jumpers from Fixed 1 is the cheapest route. All this is covered in the manual. For now just power up Fixed 1 and you should have 18v at your terminal strip and you should be able to run a MTH engine in DCS command. A good investment would be Barry's book as most of these scenarios are covered.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×