Ron-
I don't know if you're still dealing with the CSM2/DZ2500/DZ1008 but I just recently documented connection of all of that stuff so I can repeat it. Long story short, you can connect the red/black/yellow/green wires to the breakout board in the spring-loaded connectors. The BLUE 1008 wire needs to go to track power positive. The Gray and White 1008 wires need to go to the appropriate closure rails; depends on direction.
I'm also in the the process of testing the molex connector to the white connector on the breakout board to clean up wiring a bit. I'm not sure if it will accomplish much but I'm just experimenting. Jon Z gave me the connection part number and I picked up a handfull to try.
Tim