Skip to main content

Reply to "Would this be a good replacement wall wart for my TMCC Powermaster"

The wall wart is only 12 volts.  The usual current maximum voltage for the Powermaster is 18 volts.  This may not be a problem if the speed at 12 volts is as fast as you want to run your trains.  4.17 amps is on the low end of the scale (think 35 watts or possibly 50 watts).  Whether this amperage is OK depends on what you're planning to run.  A single modern can-motor locomotive would probably work as long as it's not pulling passenger cars with incandescent light bulbs.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×