Skip to main content

Reply to "Would this be a good replacement wall wart for my TMCC Powermaster"

gunrunnerjohn,

Sorry that I didn't address the switches in my last post. The CMD/CONV switch is set to CMD. The PROG/RUN switch is set to RUN.  There is no 135/180 switch on this unit, it must be an older model.

I will set the PGM/RUN switch to PGM and program the train as train 1 on track 1, and try again.

Thanks for your patience with this newbee.

Robert

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×