Skip to main content

Reply to "YLB - First Impressions - Great!"

This evening, following the success of the S-1, I dd the Lionel 6-11208 UP Legacy Lionmaster 4-8-8-4 Big Boy #4011. Pretty much the same story:

  1. Remove 4 screws to liberate the tender shell
  2. Plug the YLB to the battery socket
  3. Remove the heatshrink sheath from the gaggle of center rail wires
  4. Strip and connect the red wire to the gaggle of center rail wires using a new twist nut
  5. Replace the shell and 4 screws
  6. Enjoy the improved operation!

 

Only issue I experienced here is the YLB doesn't supply power long enough to allow the shutdown sequence to complete, but this may be due to user error by putting the YLB through its paces and not allowing enough "charge time".

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×