Skip to main content

Z-1000 with Z-Controller and CW-80 Waveforms

If anyone wonders why the Z-Controller and other chopped waveform transformers cause issues with some environments, one only has to look at the waveform, UGLY!   The output of the brick is just fine until it goes through the Z-Controller!  Adding a 2A load (8 ohms) cleans up the ringing a bit, but it's still ugly.

Since the CW-80 gets such a bad rap, I thought I'd check it out.  WOW, with no load it really is UGLY!   Looks pretty much like the Z-Controller with the 2A load.  I think all the ringing with no or a light load may be the CW-80's undoing.

Full Scale Z-1000 Controller Output

Half Scale Z-1000 Controller Output

Z-1000 Brick Output

Z-1000 Z-Controller Full Throttle Waveform 2A Load

CW-80 Half Throttle

CW-80 Full Throttle

CW-80 Half Throttle 2A Load

CW-80 Full Throttle 2A Load

Attachments

Images (8)
  • mceclip0
  • mceclip1
  • mceclip2
  • mceclip3
  • mceclip4
  • mceclip5
  • mceclip6
  • mceclip7
Original Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×