Skip to main content

Reply to "Z-4000 Repair"

lehighline posted:

"They are soldered between pins 2 and 3 of U-1, 2, 5, and 6 on control board."

Does this mean U-1, U-2, U-5, U-6? Between pins 2 and 3 of each?  So I need 4 caps? Just seeking clarification.

 

Chris

LVHR

Yes,  Just those for micro chips get a cap, and the cap is soldered between the legs (2 and 3).  These chips are 8 leg (2x4).  The dimple on the chip is pin 1 and pin 2, 3, 4 on same side.  G

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×