Skip to main content

Reply to "Z-Stuff DZ-1000 wiring for non-derailing operations"

Jeffery:

If I understand you correctly you want to know how to wire DZ-1000's for non-derail. You need to isolate the inside ground rail of the turnout then connect a wire from the rail straight to the appropriate terminal on the DZ-1000 (straight or curve). I usually isolate the track going into the turnout to give the turnout time to switch before the locomotive hits it. You only need do so on the one end where the track connects to other track.
You can isolate the tracks going into the curve or straight portion of the turnout and connect the wires to their appropriate terminal on the DZ-1000

Joe

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×