Skip to main content

Reply to "Z1000"

@SteveH posted:

If both locomotives are LionChief, then yes, the fixed 18VAC output can be connected directly to the center and outside rails.

Since the 14VAC is connected to the switches, make sure that the same polarity is maintained for both (14V and 18V) output connections.  The switches' Ground/common and the outside track rails share the Common connection, so make sure both outputs from the Z1000 brick are phased when connected to track and switches.

It may also be helpful to know that the 18VAC barrel connector's inside "tip" is Hot and the outside is Common.

Thanks, now I don't have to take the barrel connection apart to find the hot side and I can just get a female barrel connector and wire it to my track buss

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×