Skip to main content

Reply to "Z1000 Brick and the DCS app"

According to the “conventional” section of my PS-3 Chicago Yellowbook set’s manual;

”To activate the TAS, press and hold the bell button for approximately 2 seconds.  If you do not wish to stop at the station that is announced after activating TAS, press and hold the bell button again without throttling down the train.”

It also appears that besides transit announcements, firing the coupler, speed control, locking direction, learn mode, auto & manual mode are available to a conventional operator through different sequences of horn/whistle & bell button pushes.

Hope this helps

Tom

Thanks,

Seems strange that it isn't possible with the MTH Explorer.   There are an awful lot of posts here on DCS, TIU's, etc dating back years.   A bit overwhelming when trying to decide whether or not to purchase a (second hand) subway set just because MTH is (was) the only recent game in town.  A large expense just to run it well.

John

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×