Skip to main content

Reply to "Z4000 issue"

Again, key point is that TIU channels are also isolated internally and I have yet to see a fault that can cross talk power out of the 2 channels. This clearly points at your output wiring on the output side of the TIU and track as the fault, not your TIU and not the Z4000.

And, specifically, your attached video does not show the output wiring of the TIU to your track.

So, this implies there is nothing wrong with the Z4000, nothing wrong with the TIU, and something likely wrong at your track and wiring between the track and TIU.

Another factor I noticed in your video is your TIU would be constantly powered if you hooked up an aux power adapter. As it stands now, you must power channel 1 fixed in to have the logic of the TIU powered. If you only power up channel 2, then the TIU logic would not function.

Attachments

Images (1)
  • mceclip0
Last edited by Vernon Barry

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×