Skip to main content

Reply to "Z4000 Serial Numbers - Common Issue? (Closed Topic - See my last reply)"

any transformer no matter who makes it can fail from a melted terminal if the holding nuts on the terminals inside the transformer becomes loose. don't blame the transformer it is not that difficult to check the inside terminals for tightness, if you don't feel comfortable I'm sure you have a friend in your hobby that would be glad to check your transformers for you weather it is a Lionel or MTH model!!!

Alan

P,S. THE P[ROBLEM IS WHEN THERE IS A Loose connections that creates heat and the heat makes the joint draw extra amps that it was not designed for, if you have loose circuit breaker wires in you home you could have your house burn down, always want to make sure your wiring is tight connection no matter what you are working on ok.!

good luck   

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×