Skip to main content

Reply to "ZW-C Problem"

Slugger posted:

A further test in command mode with Legacy. I was only able to get the ZW-C to receive commands from the command base by running a wire from the base to the common posts on the ZW. 

Hi Stephen,

The original ZW-C manual does say to attach the Command Base to the ZW. (Although later in the manual it says connect to either the "U" on ZW or "U" on track).

I've always had my command based connected to the ZW-C first.

Do you still have the jumper plugs for the power inputs on the back?  If so, try plugging B C and D, and just using A with one power house.  See what A reads then.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×