Skip to main content

Reply to "zw whistle wafers"

SteamWolf posted:

I just did this. You need a pair of 11N1190AR diodes, the nuts and some washers. Pop the quick-nuts with the black wire off and discard the discs and mounting hardware. De-solder the black wire from the quick nut and put your diode in the hole. Resolder the black wire to the loop in the diode. While you've got everything apart, might as well clean the shaft underneath and re-dielectric the copper contact.

Thank you for the information.  What is the source for the diodes you are recommending?

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×