Tagged With "Lionel Congressional"

Reply

Re: Old Lionel Boxes

Pingman ·
John, go ahead and make the box repairs--your locomotives, etc. will have more value with a repaired original box than if it is sold without a box. As noted above, a repaired box on its own may not hold much value.
Reply

Re: Old Lionel Boxes

J Daddy ·
I would avoid using tape. Best to leave the flaps unglued and lay them flat to avoid more damage.
Topic

Old Lionel Boxes

John F ·
Several years ago I took my old trains out of the attic to create a lay out of approximately 12 foot by 9 foot. A lot of the stuff is quite old (going back 50 or more years) and were still in their original Lionel boxes. My understanding is that the value of some of these older items are enhanced if they come in their original box but many of these old boxes are falling apart. I can use scotch tape for box repairs but is there something better? John F
Reply

Re: Old Lionel Boxes

Jagrick ·
condition determines value for most part, rarity of number the other. Repaired/damaged boxes unless a rare item are low in value
Reply

Re: Old Lionel Boxes

Steamer ·
and sometimes the sales stickers and other markings can add to the story of the item. If you are considering tossing any, put them on the for sale forum here first.
Reply

Re: Old Lionel Boxes

eddie g ·
I would never tape the boxes together. Wrong, wrong, wrong.
Reply

Re: Old Lionel Boxes

Rescued Trains ·
J DADDY is correct, do not tape boxes, probably has more value in the "as is" condition.
Reply

Re: Old Lionel Boxes

HOPPY ·
Hey what about the outer shipping boxes? Are they worth saving in addition to the item's shelf box? I am unpacking all my trains to store on train room shelves. The brown cardboard shipping boxes take up a lot of room and I'd rather not keep them. None of them are older than 1995 anyway. Hoppy
Reply

Re: Old Lionel Boxes

Dave45681 ·
If you actually keep the inner boxes inside the shipping boxes, it's not a lot of extra room. (well, it adds up a little based on the thickness of the cardboard, but I assume you mean keeping them separate form the inner box?) They can help protect the inner box so it doesn't get as much shelf wear over the years (dinged corners, marks from sliding across the shelf, etc). Value probably not a huge differential, but they definitely can help preserve the inner box. Given a choice, I prefer an...
Topic

Lionel SD-70 6-28227 lamps circuit

Highroller2000 ·
Hi, I would like to replace the 6 grain of wheat lamps in my Lionel SD-70 # 6-28227 for LEDs (the pair of lamps for the CAB, NUMBER BOARD and DITCH LIGHTS). I made a working LED circuit which run from 0-18V AC but before clipping any wire in the loco I would like to know exactly how the lamps are driven in these SD-70 model. I assume they are all powered by the track voltage wich is max 18V AC ? I would also like to know if they operate the same in conventional and TMCC mode. Thanks
Reply

Re: Old Lionel Boxes

wb47 ·
Given the fact though that most of the old stuff does not go for much anymore, why struggle with boxes that are falling apart. My vote is to throw or tape.
Reply

Re: Old Lionel Boxes

MattR ·
I tape them with high quality clear packing tape. They come good. Better than a box you have to put in a bag or envelope because of all the pieces. My thoughts anyhow.
Reply

Re: Old Lionel Boxes

ADCX Rob ·
Here is an alternate fact .
Reply

Re: Old Lionel Boxes

George S ·
Correct. Tape will eventually ruin your boxes even if you can get it to look good at first, which is very difficult. I have repaired boxes with high quality wood glue used sparingly. I then clamp it or press it until dry enough to hold. I also read a thread somewhere discussing box repair. There are some very sofisticated approaches to torn box repair as well. Water damage is one of the hardest problems to solve. BTW, I do like to keep boxes and I do value boxed items more. However, I don't...
Reply

Re: Old Lionel Boxes

C W Burfle ·
Now show me one with a dump car or a 3 lid tank car or a hopper car please. The man was not talking about the rare items. He has an old set out of the attic. How do you know? I reread the original post. The poster didn't say what he had.
Reply

Re: Old Lionel Boxes

TomlinsonRunRR ·
I can't speak to the collecting value of taped boxes one way or another but from an archival point of view, I can see two safe options. One is to use acid free "scotch" tape. Most stores commonly sell this now because of its safe use for photo albums (remember those from pre-phone camera days? :-). It shouldn't crack or yellow. The second option would be to use archival mending tape, which you can find in art stores. It is much weaker and more like rice paper but if you just want to shore up...
Reply

Re: Old Lionel Boxes

C W Burfle ·
IMHO, putting tape on the outside of a postwar box pretty much reduces the value to zero. Then again, I don't think a tattered box has much value anyway, unless it is a very rare one, with contents. Many 1960's pieces were normally sold in sets where the pieces did not have individual boxes. Sometimes boxed examples of those pieces will bring a significant premium. But I am not taking big bucks in any case.
Reply

Re: Old Lionel Boxes

George S ·
Why would you ruin them with tape in any case? If you are going to take the time to do something, do it right. As tape ages, it will discolor and lose it's adhesion. I have seen it many times. By that time, the finish of the box is destroyed. If you want to keep the boxes and keep them nice, don't use tape. George
Reply

Re: Old Lionel Boxes

wb47 ·
I agree Jim, that western pacific car is pretty nice and I think somewhat scarce, but what most of us have are stuff like this: lionel lehigh valley black hopper car, lionel sunoco 3 dome tank car, lionel 6457 caboose with rough box, or lionel 3461x lumber car with rough box, how about putting a price on these just for example and then how much extra would a box left rough be worth over a box with tape? Just for example thanks, now be careful or you might own these! Thanks
Reply

Re: Old Lionel Boxes

Former Member ·
Surely, you have to take a variety of factors into consideration...but I say, fix em! I've used glue - and clear packing tape to good effect. On MPC and LTI era boxes - just fix them! - They are so much stronger and more useful. Pre-war flats - its up to you. Fortunately, glue works well on these. One thing is for sure - LIONEL boxes suck! Made to be destroyed when used "normally" Reverse the trucks and pray nothing catches!!! And how do you open them without ripping the lids...I use a...
Reply

Re: Old Lionel Boxes

Steamer ·
Marx boxes are hard to fins. Prewar,Postwar, and MPC boxes are desirable. Please list them for sale here before the burn barrel!
Reply

Re: Old Lionel Boxes

TomlinsonRunRR ·
Roving Sign, I hear you! My problems, regardless of manufacturer, are trying to get the styrofoam out of the box without shredding either, and then when replacing the car, the clear "window" plastic gets caught. Once it's bent up inside the box, you're doomed. That's when I break out the tape and tack the plastic back down. I'm normally very careful with my possessions but these modern boxes do not seem to be designed for frequent use. Just one woman's experience. Tomlinson Run RR
Reply

Re: Old Lionel Boxes

Popi ·
duct tape, "if it aint broke, you aint trin hard enough"
Reply

Re: Old Lionel Boxes

RailRide ·
Some people want boxes they don't have, some people have boxes they don't want. Why not bring the two together? List what you have in Buy/Sell and see if you get any takers for at least some of them. I imagine somebody out there will take at least some of them off your hands . Eventually. (Personally, I'm looking for a RailKing box that'll fit this caboose , and a MTH Premier box for a 50' boxcar) ---PCJ
Reply

Re: Old Lionel Boxes

Jim Policastro ·
Here's an example of a box that is worth as much if not more than its contents. It just walked into the local train shop as part of its train set (#2223W). The owner had no idea of its value or rarity. He was amply rewarded in the four figure price we paid for the set. You never know what's out there. As far as box restoration is concerned, it can be approached with the same techniques as used for museum preservation of valuable paper documents. It's just a matter of matching the degree of...
Reply

Re: Old Lionel Boxes

wb47 ·
Now show me one with a dump car or a 3 lid tank car or a hopper car please. The man was not talking about the rare items. He has an old set out of the attic.
Reply

Re: Old Lionel Boxes

El Classico ·
Glue and card stock on the inside tend to do well.
Reply

Re: Old Lionel Boxes

Jeff Noll ·
I use book binding repair tape. It will last forever and sticks to the tagboard Lionel boxes are made of. Scotch tape is temporary at best.
Reply

Re: Old Lionel Boxes

Popi ·
that brings up another point, what to do with boxes, ive got boxes from pre, post MPC, Williams, MTH, Kline, Marx. Im about ready to send them to the burning barrel
Reply

Re: Old Lionel Boxes

Tiffany ·
Hello RAILRIDE I have a Railking box with white insert for this caboose you have (off-set steel caboose). The box has no tears or missing flaps and the plastic window is good, it had little sign of wear and with the price sticker on the front "21.99". The condition of the box and white insert is very good to like new. This box was for a Santa Fe # 30-77016, I would try to take pictures of the box. send me E-mail if interesting. "I do this all this to make the Good News known. I do it so that...
Reply

Re: Old Lionel Boxes

Rod Stewart ·
This brings back an awkward childhood memory. About age 8 or 9 I received a new Daisy BB gun for my birthday. A short time later a buddy and I were in the basement trying it out and deciding what to attack next, we found a stash of, you guessed it, Lionel train boxes. We probably peppered about 15-20 of them full of BB holes, then threw them in the trash. I guess it seemed like a great idea at the time! Thankfully the respective cars were on the layout and the boxes were empty! I seem to...
Reply

Re: Old Lionel Boxes

hhtrains ·
I have the insert for a Lionel #2358 GN EP5 which probably fit any EP5,thought it might be worth something but didn't know how much. As you can see from the pictures it is close to perfect condition
Reply

Re: Old Lionel Boxes

C W Burfle ·
And how do you open them without ripping the lids...I use a dentists pick to open some of them Slip a thin blade like a knife between the tuck flap and the side flap to guide the edge of the tuck flap past the side flap. It's a bit tricky until you've done it a few times. Lou Shur taught me that trick.
Reply

Re: Old Lionel Boxes

Rod Stewart ·
I have pristine empty boxes and foam inserts for Lionel BN SD-40's #8585 and dummy #8586 doing nothing, if anyone needs them. These are from about 1989 as I recall. Rod
Reply

Re: Old Lionel Boxes

C W Burfle ·
After receiving a few old postwar lionel boxes with corresponding accessories or engines or cars. A thought hit me. I think others would share my sentiments. You can't run the boxes... That's true. But there are people out there who are more interested in collecting Lionel trains than running them. Nobody really knows which group is larger. Many do both. Some of those people like to have their Lionel trains in their original boxes and are willing to pay a premium for them. This is not unique...
Reply

Re: Old Lionel Boxes

aussteve ·
I like to keep the boxes. I bought this car just to get the box.
Reply

Re: Old Lionel Boxes

John F ·
I seem to have stumbled onto a hot topic with all these replies. Thanks for the many ideas. I still have to decide to make some kind of permanent repairs to boxes where the flaps on either end have come off. JohnF
Reply

Re: Old Lionel Boxes

George S ·
Here are some good resources: http://ourpastimes.com/restore...ard-box-5943698.html http://www.randystoyshop.com/boxres.htm http://www.thegamesjournal.com...RepairingBoxes.shtml https://www.youtube.com/watch?v=8oS__7nSNo8 https://www.youtube.com/watch?v=mBBAXhxFA6c I also prefer using Titebond Premium Wood Glue to using white glue or Elmers. George
Reply

Re: Old Lionel Boxes

Popi ·
if I ever get up in the attic, ill dig around and see what ive got and list them. which begs another question, anybody ever shipped boxes and how do you ship them. do you ship them in place or do you fold them flat and ship them that way
Reply

Re: Old Lionel Boxes

George S ·
Do you have the flaps? Was the seam torn neat or ripped? What condition is the rest of the box? It would also help if you posted a picture. Then, maybe we could give you some very specific advice. In the meantime, I will look for that box repair video I saw a while back. George
Reply

Re: Old Lionel Boxes

George S ·
Yes. They used to be ridiculously priced, but have come down a lot recently.
Reply

Re: Old Lionel Boxes

RaritanRiverRailroadFan4 ·
After receiving a few old postwar lionel boxes with corresponding accessories or engines or cars. A thought hit me. I think others would share my sentiments. You can't run the boxes...
Reply

Re: Old Lionel Boxes

Former Member ·
Worth noting - eBay has an entire category dedicated to empty O gauge boxes
Reply

Re: Old Lionel Boxes

HMS2035 ·
I've kept all of my post-war Lionel boxes. I just love the way they smell. Hal
Reply

Re: Old Lionel Boxes

Popi ·
Paper tape
Reply

Re: Old Lionel Boxes

Steamer ·
Yes they take up space, and no you can't run them, but I like the old Lionel and Marx boxes.
Reply

Re: Old Lionel Boxes

rtraincollector ·
I agree make repairs but if you can do it from the inside of the box not the outside
Reply

Re: Old Lionel Boxes

Rod Stewart ·
So did you throw the car out? Rod
Reply

Re: 2024 Parts Info

C W Burfle ·
There are a lot of parts that just aren't available. You are looking for a part that was last used in 1969, that's almost fifty years ago. I've handled a number of 2024's that I felt were factory original. They had one driven axle. Probably only one traction tire, but I would have to check.
Reply

Re: 2024 Parts Info

C W Burfle ·
What is your engine doing? I assume the driven wheels must be slipping / skipping. If so, have you tried: replace the traction tire with a clean, fresh one. add weight to the locomotive. The Power shell on a 2041 normally has a weight riveted to the back of the shell, using the porthole in the door for the rivet. (The dummies do not have this weight, nor do the shells that were sold by MPC). I don't recall whether the 2024 locos had the weights.
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
×