Tagged With "BO"

Topic

WTB MTH B&O Caboose

Arthur ·
Looking to buy MTH B&O caboose 20-91208 & 20-91121. Thank you. Email: art422@aol.com
Topic

B&O caboose

Jeff gibs ·
Looking for an older Lionel B&O caboose. Don’t have a product number. Need O scale.
Reply

Re: Legacy controller problem - help needed

gunrunnerjohn ·
Turn the PGM/RUN switch on the engine to RUN, the symptoms you list suggest it's switched to PGM mode.
Reply

Re: Legacy controller problem - help needed

TK301 ·
Thanks for the suggestion Gunrunner. You solved my problem, albeit indirectly... The engine was already in RUN mode, and changing the mode didn't help either (I had to try). But since I had opened up the engine to clean it, I decided to check if the PGM/RUN switch had failed. The switch was working fine (tested by desoldering the leads), but I noticed that the two wires going to the switch were shorted even when disconnected from the switch. I traced the leads back to a 6-pin jack (see first...
Reply

Re: Legacy controller problem - help needed

TK301 ·
To summarize in the event anyone else runs into this problem, it was not the PGM/RUN switch on the bottom of the engine, but rather the GND/3RD RAIL switch inside the engine.
Reply

Re: Legacy controller problem - help needed

gunrunnerjohn ·
That switch, FWIW, is just paralleled with RUN/PGM switch, which also just grounds the PGM/RUN pin on the R2LC. I always wondered why they put a duplicate inside the engine, I guess it's to screw folks up if they bump it. I saw that in an older steamer motherboard a while back, it's a head-scratcher. I suppose it could be so you can work on it, but that seems a little far fetched. The chuff should come from the chuff switch on the axle cam, so that may be a casualty of opening it as well. If...
Reply

Re: Legacy controller problem - help needed

TK301 ·
Fascinating. Perhaps it is left over from early factory-set days before programming was done from the controller? Regarding the chuff, for some reason, the tender was set to Signal instead of Rail. Switched to Rail, now all works fine. Thanks again Gunrunner!
Reply

Re: Legacy controller problem - help needed

gunrunnerjohn ·
We love a happy ending.
Reply

Re: LOOKING FOR K-LINE K-4610F B&O 15" Aluminum Passenger 4-PAC

VaGolfer1950 ·
Some one has to have this set, I can't have the only set of these beautiful cars. Contact me with your price, let's deal here.
Reply

Re: LOOKING FOR K-LINE K-4610F B&O 15" Aluminum Passenger 4-PAC

rtraincollector ·
your saying 15" I can only find 21" on the bay and this guy only has 3 of the cars at $149.95 each http://www.ebay.com/sch/m.html...w=B%26O&_sacat=0
Reply

Re: LOOKING FOR K-LINE K-4610F B&O 15" Aluminum Passenger 4-PAC

VaGolfer1950 ·
Yes I am looking for the 15 inch cars. I have the 4 car set and want to add more cars to the consist. The 21 inch cars are to big for my layout, while the 15 inch cars look best on my curves.
Reply

Re: LOOKING FOR K-LINE K-4610F B&O 15" Aluminum Passenger 4-PAC

VaGolfer1950 ·
Willing to pay anything reasonable.
Reply

Re: LOOKING FOR K-LINE K-4610F B&O 15" Aluminum Passenger 4-PAC

leapinlarry ·
Wow, are these cars blue and have black tops? I have some nice Williams cars if interested. I have a 4 pack and a 6 pack...If interested. ( Larrylevin71@yahoo.com ) Happy Railroading
Reply

Re: AF Royal Blue in the garden

yamaha226 ·
Nice . My dad has this from when he was a kid , He is now 77.
Reply

Re: AF Royal Blue in the garden

Rusty Traque ·
Trains like that, baby they were born to run... Rusty
Reply

Re: AF Royal Blue in the garden

sncf231e ·
Mark, The other track with 4-rails is indeed for Gauge 1 (the outer 2-rail) and for Gauge 0 (since the rails are not electrically interconnected I can run 2-rail and 3-rail 0 Gauge). See the picture: And on the Gauge 1 track with the extra rail for S Gauge I can also run 3-rail electric Gauge 1. I do not have any prewar 3-rail 0 gauge American Flyer (I have never seen it over-here even) but I could stage a race between Flyer and Lionel Regards Fred
Topic

AF Royal Blue in the garden

sncf231e ·
Here is my next American Flyer train running in the garden; the Royal Blue Freight Train set: Locomotive 350 Royal Blue Pacific, 642 B&O Red Box Car, 631 T&P Green Gondola Car, 630 Reading Red Caboose and an extra 626 SHELL Tank-car. Regards Fred
Topic

FS: G scale Bachmann cars UPDATED!

Paul Moore ·
For sale are six G scale cars. Paypal Friends and Family or MO. Take all for $90 + shipping! That's $15 per car! Hook and Link couplers: 1. Rath Packing Co. Boxcar. Plastic wheels, $20 2. Rath Packing Co. Boxcar. Metal wheels, $20 3. Hershey's Reefer, Plastic wheels, $25 4. B&O Flatcar w/ stakes and logs, missing 1 stake, $20 5. SF Combine, no interior or lights. $20 Knuckle couplers: 6. UP Coach, has interior and lights, $25
Topic

Weaver PS-2 Hoppers, pending

aussteve ·
Two Weaver PS-2 Hoppers. Two different road numbers. Two rail cars per the box. Both B&O Chessie system, look new to me. The boxes have shelf wear. X0.00 shipped. Checks or money order, don't have PayPal. 1st I want them takes precedence over other communication.
Topic

4 Lionel Legacy for sale: CN coal set, B&O E9 AA, NYC LionMaster Freight set and NYC Transit R27 Subway set

Larry3 ·
Reducing Lionel Legacy locomotives/sets that (except for one) have been hardly run or never run. Attempting to sell on OGR On-Line Forum first. Member since 2008. Each item bought new and am original non-business owner. Conditions like almost new (except for Lionel Subway noted below.) Price excludes shipping. Ship to lower 48 states. Accept check. Pics sent to those interested upon request. Canadian National Coal Legacy train set (Lionel 6-31787) Locomotive run less than 15 minutes to test.
Topic

Legacy controller problem - help needed

TK301 ·
I have a Lionel B&O EM-1 2-8-8-4 Steam Locomotive and Tender from the Odyssey system, and a Legacy control system operating at v1.52. I have been using these systems successfully together for several years, typically putting them up for Christmas and taking them down after. Prior to this last full assembly, I had the control base plugged in the whole year round with the engine on a short section of track, completely powered on just to display the cool lighting effects. The controller was...
Topic

Looking for some coach cars from the K-Line K-4610F B&O aluminum 15'' set

VaGolfer1950 ·
Looking to add some more coach cars to the 4 car set I already have, that I will be pulling with the new MTH scale F-3 PS-3 ABA set I just received. The K-Line cars look fantastic with these, I just need to add some more coach cars. Email me from my profile if you have any you want to sell.
Topic

"S" gauge Up Graded AF #302 (NOW B&O #306)

CUSTOM "O" DECALS ·
NOW AT AUCTION 02-27-2016 Being offered at auction now: http://lbrenterprisesllc.homestead.com/Bid-Sales.html?_=1410703029914 Time: 11:30 AM (EST) Date: 02-27-2016 Item Being Auctioned: Up Graded AF #302 (NOW B&O #306) 4-4-2 ATLANTIC Engine & Tender LBRSRP: $135.00 - $249.00 Opening Bid: $35.00 USD LBR
Topic

LOOKING FOR K-LINE K-4610F B&O 15" Aluminum Passenger 4-PAC

VaGolfer1950 ·
Looking for K-Line's K-4610F B&O 15" Aluminum Passenger 4-PAC or individual cars from set. Email me your price and let me know what you have.
Topic

FS: Lionel scale C&O B&O flatcars and NYC gondola *SOLD PENDING FUNDS*

Stephen Holmes ·
I have the following for sale: Lionel 6-17585 C&O PS-4 flatcar with railway agency trailers Lionel 6-17577 B&O PS-4 flatcar Lionel 6-17460 NYC PS-5 gondola All three cars are in very good used condition with no damage and low run time. The cars were never displayed so they are not dusty and come with their original boxes. Asking price is $100 shipped CONUS for all three cars. I accept money orders only. I do not have a paypal account. If you have any questions, please email me at...
Topic

Weaver Chessie/B&O PS-2 Hoppers, new two different road numbers

aussteve ·
Two Weaver Chessie/B&O PS-2 Hoppers, new two rail. $40.00 for the pair, shipping is extra. Check or money order, I don't have PayPal. Email contact is best
Topic

WTB MTH 20-4278 B&O Combine

PRRronbh ·
Wanted MTH 20-4278 B&O Combine Heavyweight. Payment by an USPS money Order. Ship via USPS to my PO Box. Email in profile. Ron
Topic

F/S: Microscale Decals, Baltimore Harbor Tunnel & More

JBuettner ·
It’s getting to be that time to thin out my collection a bit and make a little more room for other things. If you have an interest in any of the below items, please reach out and let me know--and send me your zip code so I can estimate shipping for you first. I accept payment by check or PayPal. I will always consider an offer if you are buying multiple items. Note: One unusual item at the bottom--a tunnel / road underpass designed so you can insert into your layout. This item, due to its...
Topic

Wanted to Buy MTH 4-4-0 B&O and Passenger cars

Plyzie ·
I am looking for an MTH 4-4-0 B&O engine and associated passenger cars. They come in a set and separate. I am interested in both. Message me or email me at plyzie@gmail.com The links to the MTH sets are as follows: 20-3591-1 or 20-3591-2 O Scale Premier 4-4-0 American Steam Engine w/Proto-Sound 3.0 (86" Hi-Rail Wheels) https://www.mthtrains.com/20-3591-1 https://www.mthtrains.com/22-3591-2 20-62069 O Scale Premier 3-Car 64' Woodsided Passenger Coach Set https://www.mthtrains.com/20-62069...
Topic

K-Line B&O aluminum passenger cars

gene m ·
Want to buy B&O 2 car add-on set K4610C which includes K4610-40467 RPO car #467 and K4610-47010 Paw Paw passenger car. Must be MIB. Please send an email to genemelo@gmail.com Thanks Gene M.
Topic

Lionel B&O EM1 TMCC 6-28051

Billyboy ·
Engine just stopped running shortly after purchase about 12 years ago. Has been relegated to the fireplace mantle ever since. Recently decided to take another shot at running and noticed as the speed control on the legacy is turned up, I can hear the motor turning but no movement forthcoming. Lights, whistle, bell, smoke and coupler all operate but it just won't move. I hate to have this beautiful, expensive locomotive just sit. Any information on known problems and or potential fixes would...
Topic

MTH Railking Passenger Sets $120: Chessie, B&O, C&O, NYC

Obsidian ·
MTH RAILKING @ OVER 50% OFF Railking Passenger cars $30 each PASSENGER SETS FOR SALE: $120 MTH 30-6928 Chessie 4 car 60’ Madison in original box $120 MTH 30-67109 Baltimore & Ohio 4 car 60’ Streamlined in original box $120 MTH 30-67073 New York Central 4 car 60’ Streamlined in original box $60 MTH New York Central 2 car 60’ Streamlined in original box $120 MTH 30-67446 Chesapeake & Ohio 4 car Streamlined in original box $60 MTH 30-6763 Chesapeake & Ohio 2 car 60’ Streamlined...
Topic

FOR SALE: Like New Rolling Stock on the Cheap

JBuettner ·
Please contact me at jbuettner@stevenson.edu if you are interested in any items below. I always entertain offers, especially if you want to take multiple items and save a little $$. Include your zip code so I can estimate shipping costs for you. See attached photos for more details. 1) LIONEL 16627 CSX Log Dump Car, Like New in OB. $14 2) LIONEL 16626 CSX Search Light Car, Like New in OB, $14 3) LIONEL 17882 B&O Boxcar with ETD, LOTS 1990 Convention Car, Like New in Box, $18 4) LIONEL...
Topic

WTB - Golden Gate Depot B&O Heavyweights

jd-train ·
Looking for the following GGD B&O Heavyweights: baggage 2 sleepers diner 2 coaches observation Any leads would be appreciated. E-mail contact info is in my profile. Thanks, Jim
Reply

Re: B&O caboose

bmartz1991 ·
I have a Lionel I-12 and MTH Premier Bay Window. Both B&O.
Reply

Re: B&O caboose

breezinup ·
I think the B&O I-12 cabooses that Lionel came out with a few years ago are the neatest. Most expensive, too, unfortunately. Lionel 27609 Lionel 17647 Lionel 27635
Reply

Re: B&O caboose

Jeff gibs ·
Ok thanks. I posted this for a friend and will pass it on. Thanks for the help
Reply

Re: B&O caboose

Mark Boyce ·
I have the Lionel 17647 BREEZINUP posted above. Super model! I totally recommend your friend deal with Brad Martz BMARTZ1991. He is a super guy to work with both buying and selling!!
Reply

Re: Lionel B&O EM1 TMCC 6-28051

Hot Water ·
Those models were famous for having the coupling between the motor and the drive shaft fail. You will have to remove the boiler assembly completely from the engine frame in order to repair/replace that coupling. Once you have the boiler assembly removed, you can try and power it up on a test stand, and see exactly where and what failed.
Reply

Re: Lionel B&O EM1 TMCC 6-28051

Tinplate Art ·
I once serviced my Lionel EM-1 by simply dropping the front drive train assembly, and did not have to remove the shell. All I did was tighten a set screw, and it corrected the problem. I did NOT have to replace the shaft.
Reply

Re: Lionel B&O EM1 TMCC 6-28051

Marty Fitzhenry ·
Each of the guys above me gave you good information. It is one or the other. I would lean on the driveshaft as I have those on my workbench with that issue. The good thing is the parts are available.
Reply

Re: Lionel B&O EM1 TMCC 6-28051

FMC ·
The same happened to mine a few years back. I replaced the shaft and it has run perfectly ever since. The part number is 6SP-8051-102.
Reply

Re: Lionel B&O EM1 TMCC 6-28051

Ted Bertiger ·
I was able to glue the drive shaft firmly together as it was spinning freely. Worked fine and still works well.
Reply

Re: Lionel B&O EM1 TMCC 6-28051

turbgine ·
If you or someone you know can drill and pin the driveshaft that will forever cure this common problem with this otherwise spectacular locomotive.
Reply

Re: Lionel B&O EM1 TMCC 6-28051

romiller49 ·
Same here. Many miles since super glued.
Reply

Re: Lionel B&O EM1 TMCC 6-28051

Mikado ·
Its the coupling on the driveshaft. Simple fix! Put the loco back into revenue service, instead of collecting dust on the mantle! let me know if I can help! Thanks, Mike
Reply

Re: Lionel B&O EM1 TMCC 6-28051

Tinplate Art ·
The super glue method sounds like the permanent solution; my approach probably would have become loose again had I kept that engine!
Reply

Re: Lionel B&O EM1 TMCC 6-28051

Mikado ·
Just drill a tiny hole through the coupling, into the shaft and install either a screw or a piece of spring steel, done.
Reply

Re: Lionel B&O EM1 TMCC 6-28051

J Daddy ·
Hi Mike, I have one that the drive shaft Yolk broke at the U joint. Do you know where I can get a replacement? Thanks
Reply

Re: Lionel B&O EM1 TMCC 6-28051

Mikado ·
The steel shaft broke? the section where the coupling slides onto? How in God's name did you break that?
 
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
×