Skip to main content

Hi all I just have received my Mi Jack for my HO Intermodal Layout 

there is a problem with the smallest gear when I go to raise the gantry 

the gear is slipping on the shaft has anyone got a real answer for this one 

please would someone please tell me what to do the right way 

I am going operating on my HO Intermodal Layout 

but I have to change the forks or clamped onto the Containers 

someone might have some ideas for this please 

Kind Regards 

HO Well Cars \ Containers 

Last edited by HO Well Cars/ Containers
Original Post

Replies sorted oldest to newest

Hi laz957

Laz957 would you be able to tell me the name of the shop and location of the shop please as I am in Ireland and I have to get someone to buy the gears for me I don't know if I be able to get the glue for the gears here but I am going to try and find out can this glue be got here I just want to have a spare set of gears just in case if I can get the name of the shop where to buy the correct gears for the MI-Jack this would be perfect I might be able to get more parts there  I was trying to get HO Fully Functional crane but impossible this is my answer I think 

Thanks again Laz957 for coming back to me I really appreciate your help with this

Kind Regards

HO Well Cars / Containers  

Hi HO WELL CARS,

Here is where you can get one from on ebay.  This is expensive.  See my other post below.

http://www.ebay.com/itm/Lionel...bz_aR8vCk2EWMhpq1uhA

This is the gear for the Lionel O gauge one.  There is another set of just the two gears if you do an e bay search of  Lionel Intermodal crane gears, a bit expensive though.  Good Luck I hope you get it fixed.

Last edited by laz1957

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×