Skip to main content

Replies sorted oldest to newest

Bruce E. Vincelette posted:

BAR+MILLS+KIT+003 [1)1501297_10202769969344661_2273593688937027246_oMay+05,+2013+004May+09,+2013+00110675683_10203717339108313_8055072139952018007_n10258367_10202882368914580_366181695851550135_o028

Neat pics, Bruce.

The guy taking the picture of the poor soul under the crashed motorcycle instead of trying to help is, unfortunately, more and more common today.

Remember me from your Yahoo Newsgroup? I finally dropped out about 6 months ago. Good to "see" you again. Your layout is still in the "Friend's Layout" section of my website.

Last edited by Lionelski

Dave, this was the old TMCC crane car tender. I used some short box Kadees (806?) and CAed some styrene flush with the original coupler cutouts in the frame. I use some 8mm long 2mm screws time mount the boxes. I found a way to snip off the claw coupler and keep enough of the meat in the trucks to retain the pickup rollers. Hope these pics help:

E9AEE427-37BC-4C0D-B7D9-B7C7F08EF715A947682A-C7CF-4E64-BA6D-E6C844719980

I should probably clean that roller oops.

Attachments

Images (2)
  • E9AEE427-37BC-4C0D-B7D9-B7C7F08EF715
  • A947682A-C7CF-4E64-BA6D-E6C844719980

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×