Skip to main content

I have a Lionel PRR Y3 from the early RS5.0 days with a SSMU-something or other smoke unit that seems to lose synch with the chuff. It will follow the chuff input for a while then sort of lag a bit, getting a random puff every few chuffs. It can regain synch after stopping .

It takes in half rectified and filtered track power and that is checked out and good. 8.5vac from the ACRG is good when smoke is turned on. 

Wondering if this is a common problem with these older units and if anyone has ever seen this and got it fixed. Only other component I could change is the regulator on the smoker itself.

Original Post

Replies sorted oldest to newest

If the audio is still good, that eliminates the chuff switch.  It's rare for the Smart Smoke itself to go bad, usually that regulator is the culprit.

If you're in there working on it, consider installing the Super-Chuffer II, it manages the smoke fan and gives you smoke at idle as well.  You can also take advantage of the optional features of Rule-17 lighting and automatic cab light control.  With the Super-Chuffer, you won't be using any of the smoke unit logic for controlling the fan, problem solved!  You'll also get a lot better chuffing performance.

Everything works on this engine and I have your chuff generator in it. I suppose I could put the SC in there and that would take over for the SSMU motor controls. I could mount it near the smoker under the shell and take your nice little 5V power supply out.

Carl, that makes sense. Wonder if it was optimized for the original 2 chuff per rev...?

Last edited by Norm Charbonneau

That sounds like it's the problem Carl, the output of the Chuff-Generator at four-chuffs/rev could fall into that area.  The minimum length of a chuff output is 10 milliseconds, and it's variable up to 200 milliseconds in length as you slow down.  The chuff pulse is dynamically adjusted based on the spacing of the previous chuff to the current one.  I was trying for operation that would somewhat mimic the mechanical switch in case someone was depending on that. 

I have to be honest here, the Chuff-Generator was really only characterized to mate with the Super-Chuffer, the other stuff was just a guess based on limited information about what might be required.  A number of people have used just the Chuff-Generator with a 5V supply, and I've never gotten any feedback of issues.  However, I believe most of them just wanted the 4-chuffs for audio and either had Seuthe smoke or weren't interested in smoke operation. 

I guess in my tunnel vision view of the world, I couldn't imagine wanting the Chuff-Generator without the Super-Chuffer.

Well, at least I can separate out all the functions of this unit. The element control via the ACRG is good so that will stay intact. I'd imagine that this unit was engineered to work with the original 2 chuff per rev microswitch but it's interesting that the chuff input to the SSMU is coming in via serial comm. 

In any case, I am going through my roster and fixing up a few things. Smoke units always seem to cause more grief than they're worth. 

I have the same Lionel Y3 with Railsounds 5.  Its on my hit list to get upgraded to 4 chuffs.  Currently its still all stock with 2 chuffs and I have the same exact problem.  At very slow speeds the smoke puffs in sync.  As it starts to speed up, it starts missing a puff sporadically.  Eventually it will only occasionally puff.  Stopping the loc and then starting it again, resets the smoke puffing and the same thing will happen again. I'm interested if you figure out what the cause is so I can fix mine.

The chuff switch duty cycle is variable being cam-driven. So it can be on or off the whole time at zero speed. The switch state change duration is shorter with at higher speed. How it triggers the chuff message is beyond me though. If it's a true one-shot trigger with change of state or if it constantly transmits based on the switch state. 

 

I've never examined the chuff data in the serial data, might be interesting some day.

The Super-Chuffer varies the chuff duration based on spacing of previous chuffs.  It's also edge triggered, it doesn't care about the duration of the chuff signal once it sees an edge.  I do have a maximum length of chuff that's active at very low speeds, and also when you reach a speed of 20 chuff/second, the fan runs continuously.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×