Skip to main content

Replies sorted oldest to newest

I've had the same problem with several of my vintage controllers.  I agree with Chris: open the unit and be sure the tabs are adjusted to ensure proper contacts when depressed. Sometimes there is insufficient contact, and sometimes too much causing shorts.  Also, be sure the solder points of the wires remain intact.  Sometimes they come loose...and what fun it is to resolder them in close quarters!!

Michael

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×