Skip to main content

I just took delivery of a new Lionel SD40-2. First time I have been disappointed with a Lionel loco.  The kinematic coupler on the front hangs down and the plow hits the rails and catches on the turnouts. In addition they hang over on curves and hit the switch machines.  The rear assembly rises up and only I/2 of the coupler stays engaged and the pilot wont re center after coming out of a curve.  I hope the dealer will take it back. 

Original Post

Replies sorted oldest to newest

Thanks for all the replies,  the dealer accepted a return so I don't have the problem any more.  I can't believe that Lionel would produce such a poor system.  I used to be a engineer and the concept is good but many times the actual produce is riddled with problems.  My old saying was everything works on paper.

Hm.  For some reason I thought this was Lionel’s first attempt at kinematic pilots on the SD40.  I agree that the kinematic pilots on the ES44AC from five or six years ago look great, and I haven’t read many complaints about those.

It’s my understanding that each “run” is made in various Chinese factories on a contract basis.  So there’s no guarantee that the quality or even parts content will be the same from one run to another.  This is the reality of the modern toy industry.

Last edited by Ted S

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×