Can someone post the track plan for an 036 fastrack reverse loop.
Thank you,
Dennis32
Original Post
Replies sorted oldest to newest
Check THIS out...
Here are 2 versions. As Rob has pointed out there are different ways to do it depending on the end goal, especially if you want to have longer trains be able to pass through. Both of these can be stretched simply by adding the same length straights to the apex of the loop and the straight section. The 2nd example is preferred because it doesn't have the "S" curve.
Attachments
Images (1)
I made one years ago that uses far fewer pieces.
http://www.scarm.info/layouts/track_plans.php?ltp=99
The link should work since I do not have the image on hand. it used a 3/4 and a 3/8 the rest are five and ten inch pieces. The trick was shifting the curve coming out of the turnout.
