Skip to main content

Steamfan77 posted:

I made a few additions to the area near the lift up section. I disguised the hinges by covering them with some clump foliage. But per CSX Al’s suggestion, I added some variety to each area so they don’t all look alike. Below are some before and after pictures. 

Andy

945D9287-FC00-43F2-B260-8F587B75EAC3C6E9ECA4-1D2C-4671-99DD-C491AE2EE23E9CD2D83F-D881-4409-A29A-62485C9C7DF8BD8E5947-90A0-46C0-B695-7EC4DB032CCABEA8D542-2E3D-4EA3-BF06-57220B60420ACD4BC1DE-CC83-4F30-A02B-0741CF08A30E

Looks great. Can you buy that stuff affordably in bulk?

Mark, Reuse is my best friend & it really keeps the wife happy cause I am not spending money! I sure hope the painting went well!

Johan, nice job! It that # 7 or 8 finished?

Lee, Make sure when your ready and pleased to share some pictures of your wonderful work with the rest of us!

Andy the Tortoise setup looks great! Also nice work on the hinges and hiding them! add a few birds and your done! !LOL

Jonathan, Looks like you have a good start! Thanks for sharing with us and hope you get your ZW back soon!

Bob, very nice switcher~! looks wonderful, what's that make now 150 or so switchers! LOL

Ralph, Nice blue pipe! I hope you keep coming up with these ideas cause they sure are helping me out to save money down the road!

 

Lee, the weathered car looks great!

Rick, That's a great looking trestle.  It certainly adds another dimension to your scenery!

Mike, I didn't get to the painting today.  In fact, after working outside I couldn't find the gray paint I was thinking of, so I'll have to go to the hardware store.  Maybe tomorrow, but after church I have to make a trek to see my aunt in the personal care home.

Mark, I was just checking in! It will be there when the time comes!

So today was a busy day for me, first I had to go to the store to take care of some issues, but that was done in a hour! Ya!

Then I came home, and took out all the switches that I had already installed without Tortious Switch Machines just so I could pre drill them for future switch machines. I had to do something while I waited for the paint to dry on my scratch build Engine Service Building.

I had already got all 6 of the TSM's I had installed and love how they work so all my switches are getting them. I have found 4 areas where I am going to have to do a offset mounting but heck that should be easy compared to some of the places I have already had to crawl into just to mount the ones I have.

While I was at it I also took the time to lay some more track! I am done with track till I get more, so I guess it will be back to the scratch build tomorrow!20190413_15373120190413_153741                                          I sure hope everyone has a great Sunday!

Attachments

Images (2)
  • 20190413_153731
  • 20190413_153741

Lee and Johan, nice weathering jobs.

Gandydancer1950, great video. Well done scenery it looked real.

Jack, nice buy. That is one of my favorite color schemes.

Mike, you are moving right along.

 I got back from York in the afternoon on Saturday. It wasn't a bad trip. This time though I spent m,ore for the hotel then I did for trains. Not that I wanted it that way. I just didn't find what I was looking for. Maybe the October York. But I did get a few things. Got needed switches from Ross to do a couple of areas on the front tables. Plus picked up some nice loads for my hoppers and 65' gons from Don Kane. He makes great loads. I am getting two Railking side dump cars from the Canadian club and he made up some sand loads for me. Also he made coke loads for my South Buffalo hoppers. And some items from Scenic Express. At the end of the day on Friday I managed to find another Weaver 2 bay wood chip hopper. So I came out with some good things. Some pics.

DSCN0505DSCN0506DSCN0507DSCN0508DSCN0509DSCN0510DSCN0511DSCN0512DSCN0513DSCN0504

Attachments

Images (10)
  • DSCN0505
  • DSCN0506
  • DSCN0507
  • DSCN0508
  • DSCN0509
  • DSCN0510
  • DSCN0511
  • DSCN0512
  • DSCN0513
  • DSCN0504
mike g. posted:

Mark, I was just checking in! It will be there when the time comes!

So today was a busy day for me, first I had to go to the store to take care of some issues, but that was done in a hour! Ya!

Then I came home, and took out all the switches that I had already installed without Tortious Switch Machines just so I could pre drill them for future switch machines. I had to do something while I waited for the paint to dry on my scratch build Engine Service Building.

I had already got all 6 of the TSM's I had installed and love how they work so all my switches are getting them. I have found 4 areas where I am going to have to do a offset mounting but heck that should be easy compared to some of the places I have already had to crawl into just to mount the ones I have.

While I was at it I also took the time to lay some more track! I am done with track till I get more, so I guess it will be back to the scratch build tomorrow!20190413_15373120190413_153741                                          I sure hope everyone has a great Sunday!

Your track work look great Mike!

Steamfan77 posted:

I made a few additions to the area near the lift up section. I disguised the hinges by covering them with some clump foliage. But per CSX Al’s suggestion, I added some variety to each area so they don’t all look alike. Below are some before and after pictures. 

Andy

945D9287-FC00-43F2-B260-8F587B75EAC3C6E9ECA4-1D2C-4671-99DD-C491AE2EE23E9CD2D83F-D881-4409-A29A-62485C9C7DF8BD8E5947-90A0-46C0-B695-7EC4DB032CCABEA8D542-2E3D-4EA3-BF06-57220B60420ACD4BC1DE-CC83-4F30-A02B-0741CF08A30E

Andy,

Just know I will be stealing this very clever idea.

Dave

Mike- This was # 23...but who's counting. And that's just the diesels.  The track work looks good.

Paul- I've slipped and slid my way to the bottom and I'm looking up already.

Paul2- nice haul from York. I need to get out there one day.

Mark- hope you get the paint today and have time to get some train work done.

Jon- nice classic 027 layout.

Lee- Another nice TOFC

Patrick- The 0-4-0 looks good. Gotta work up the nerve to try weathering one day. Still need to get past keeping my trains shiny and clean.

Andy- I like the changes on the hinges. Why did you mount them up in the 3/4" blocks? Structural reason or clearance issue?

Rick- nice trestle. Looks great.

Ralph- You're on a roll there. The loads keep coming!

Bob

Last edited by RSJB18
mike g. posted:

Mark, Reuse is my best friend & it really keeps the wife happy cause I am not spending money! I sure hope the painting went well!

Johan, nice job! It that # 7 or 8 finished?

Lee, Make sure when your ready and pleased to share some pictures of your wonderful work with the rest of us!

Andy the Tortoise setup looks great! Also nice work on the hinges and hiding them! add a few birds and your done! !LOL

Jonathan, Looks like you have a good start! Thanks for sharing with us and hope you get your ZW back soon!

Bob, very nice switcher~! looks wonderful, what's that make now 150 or so switchers! LOL

Ralph, Nice blue pipe! I hope you keep coming up with these ideas cause they sure are helping me out to save money down the road!

 

Mike: Thanks. You have a good memory. It's a car number #7. 🤝

Johan

Mark Boyce posted:

Brian, All aboard; Amtrak!  I see it is an Amtrak day!

Johan, And another great looking one!

Dave, Looks great!!

Last weekend, I put down the Homasote and cork roadbed on my top loop, minus the area where a switch and siding will go.  This weekend I hope to get the cork painted with the rock fleck spray as before, but I'm going to take the advice of Chris @lehighline to paint it first with flat gray, then spray since the rock fleck paint empties fast.  I'm going to follow Bob's and Butch's suggestions about combating over-spray as well. After my first go at it,  I scraped the over-spray flecks off a bunch of stuff with an old plastic discount card.  The stuff came right off, but why get that stuff in the air in the first place?

Mark. Thank you. 

Johan

Patrick, thank you sir! It means a lot to me coming form you! You have such a great layout that makes one only dream!

Jonathan, looks good! Your moving right along, keep up the good work!

Johan, I try to keep up on great work, and yours is one of them!

Hi guy and gals, I ran across this on another thread here on the forum and thought some of you might be interested in this!

https://www.mcssl.com/store/03...e-material-25-lb-bag

https://www.youtube.com/watch?...amp;feature=youtu.be

EVERYONE HAVE A GREAT SUNDAY!

Gandaydancer, nice scene. 

John, nice work on the Dash 8, the trestle, and landscaping.

Bob, I like your NW-2, it's really sharp.

Ralp, those pipe loads are something! Well done.

Thank you Mark.

Kevin, the clump foliage is from Woodland scenics. A large bag is roughly $18.50 I think.

Thank you Lee. Nice work on the flat car.

Thanks Mike. I'll see what I can do about the birds . Nice track work too. 

Rick R., nice work on the trestle.

Paul, I like your finds at York, very nice.

Dave, feel free to use that idea anytime. 

Bob, with a 1/2" block, the hinges are just slightly above the rail. It's probably overkill on 3/4" blocks, but after I camouflaged them, they look ok, and work even better.

Andy

 

 

 

 

 

Lubed the new Shay.  Ran trains.  Created a spring time scene in one of the two parks on my layout, using scenery items bought at Scenic Express on Friday at York. Still have to construct a higher retaining wall ( behind fellow on park bench ) to hide the battery on/off box used for fence lights.  Planted some fall trees ( also purchased at Scenic Express while at York ) over on the Mt. Randolph side of the layout.  All in all ... had fun on this fine Sunday!! IMG_9380

Attachments

Images (1)
  • IMG_9380

B23C9D9C-6EA0-4082-97C8-74A2B1675B337DCF8779-5155-4CEF-9B42-619A94F68433I did another incandescent to LED conversion on an MTH Passenger dome car this afternoon.  Yesterday I had installed a switch in the bottom of the car so I would have the option of turning off the LEDs that will be in the dome.   It took me 2 hours to install everything.  Used fine magnet wire to connect those LEDs in the dome to the buck converter via the switch and a disconnect.  During the last week I also converted a couple of MTH ARR baggage and coach cars.

 

Larry

 

Attachments

Images (2)
  • B23C9D9C-6EA0-4082-97C8-74A2B1675B33
  • 7DCF8779-5155-4CEF-9B42-619A94F68433
Last edited by PSAP2010

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×