Skip to main content

Finished installing the last 100 feet of fiberboard for the girders and got another 20 feet of cardstock girders spray adhesive on.  Have to install another 150 linear feet of the cardstock and then I can wire track for power.  Next 3 days booked so no work until Monday.  Layout is a complete disaster as I had to keep moving everything around as I was attaching the girders.  Here is where i am at now.

20190711_191636

Attachments

Images (1)
  • 20190711_191636

Lew, I feel your pain. I tried to keep mine nice and neat, but in the end it still looks like a rats nest! At least you have a plan for the refinery!

Dobermann, the cemetery is looking good!

Mitch, very impressive! Some very cool stuff on display!

Bryan, WOW you have been busting butt! Very nice work!

Paul 2, your quite the motivator, If I were you Mark I would watch out, the next thing you know Paul will be charging for his services to supplement his layout! 

Brian, great pictures! But please do me a favor and make sure your well stocked up with Ice Cream for Marci and Izzy! I am not sure you need any as you have that beer train running around there somewhere! LOL

As for me I was right no train room today due to doc and work, Just got home and its almost bed time! But tomorrow is Friday and only diving tomorrow, so it looks good right now

Last edited by mike g.

Been working on the south end of my layout, adding some water features.  This is a long process for me for several reasons, but primarily due to I am not sure what I'm doing.  Thankfully, there's so many good examples on the OGR Forum to pull from.

The water features will include a pond that will sit on a piece of foam that is a removable access panel.  The pond will spill over to a stream/river winding its way to the border of the layout, crossed by double tracks.  Or at least that is the general concept.  Not sure about bridges yet though leaning to plate girder.

All the foam joints and any gaps in plywood base are sealed with silicon caulk. The plywood river bottom will get a light coat of drywall joint compound, sanded.  For the terrain forms I'm covering with some left-over WS shaper sheet plaster I had, but will do rest with sculptamold.

The river is at a stand still for now as I do not have the bridges and want to have on hand to figure out how the footings will work.

20190708_18575320190708_18581320190712_08300320190712_083019

Attachments

Images (4)
  • 20190708_185753
  • 20190708_185813
  • 20190712_083003
  • 20190712_083019
Arnold D. Cribari posted:

Took a drive in my 1st car: 1967 blue mustang convertible:

20190710_222731

I lied. I'm still on the hunt for that Mustang in approx. O scale. The above car is really a Mathbox Premium Corvette. Arnold

It's funny you posted this. My brother in law just gave my sister a 1966 Mustang convertible for there 20th anniversary! 

Mark, Bryan saved you for the time being. I wore my whip out on him. Can't find one long enough to reach you so if you see a drone over your house with a whip on it......it's me LOL

Steve your river is turning out nice. I used Woodland Scenics realistic water. It is self leveling. I see you said you caulked everything. I thought I did too. Luckily I went back down to check on it and found I had a small spot that was leaking it onto the ground and got it stopped before I lost all the water. A couple of pics to show what I did. I never did water before these two scenes. Paul 2

DSCN1750DSCN1753DSCN0420DSCN0397DSCN0471

Attachments

Images (5)
  • DSCN1750
  • DSCN1753
  • DSCN0420
  • DSCN0397
  • DSCN0471
briansilvermustang posted:
Mark Boyce posted:

LOL. My first car was a ‘69 Ford Galaxy XL.  I’ll never find a model of that!  Scratch build?  No, not me.  LOL

 

      here you go Mark...

 

     nice looking car...

Unbelievable!  Leave it to you, Brian, to find one!  I think that is out of my price range however!!  Here are a couple photographs that are pretty close to how it looked.  The blue in the rear view is spot on, but without the silly decals!  That was a cooker in that car when I moved to Richmond, Virginia in 1976 since the only air conditioning was 4-60 AC!! 

ebay_171513696960_21969 ford galaxie 500 011

Attachments

Images (2)
  • ebay_171513696960_2
  • 1969 ford galaxie 500 011
Last edited by Mark Boyce

Howard, the train room looks great!  I like the hobby shop look and the layout is always great!

Steve, your river and pond look great!

John, My dad drove a '49 Chevy that looked very much like that, but without as much ornaments.  Olds versus Chevy.

Johan, that is a great looking flatcar load!!

Paul,  I'll keep an eye out for the drone!  Your waterways look great!!  First and second tries turned out great!!

Howard, great looking room! You can hardly see the washer and dryer!

Mayor Magoo, Looks like you have a great start for going into it blind! Keep it going and post more pictures when you can!

John, Beautyful car! Sure would be nice to have one now a days!

Paul, looks great! But I do think I seen a little dust on the river~! LOL If your drone makes it to Marks house, I think we all be better watching out! 

Johan, Nice job on the lumber load! Also I like the guy by the little shack!

Well for me I went and did my dive this morning, all excited about not having to work this afternoon, I got home and there was a lovely note from the CEO stating that she thought the grass was getting a little long! Needless to say I was wrong and another day goes by with no train room work! The CEO gets home and I am in the middle of mowing the lawn and she goes to her nice She Shed. I get done with all the yard work and in passing I let her know another day with no train work. She informed me that its ok we have the rest of our lives to work on stuff like that! LOL Who knows maybe tomorrow! 

Tomorrow is Saturday I hope everyone has FUN!

Mark Boyce posted:

Howard, the train room looks great!  I like the hobby shop look and the layout is always great!

Steve, your river and pond look great!

John, My dad drove a '49 Chevy that looked very much like that, but without as much ornaments.  Olds versus Chevy.

Johan, that is a great looking flatcar load!!

Paul,  I'll keep an eye out for the drone!  Your waterways look great!!  First and second tries turned out great!!

Mark. Thank you. It's a repaint MTH load.

Johan.

mike g. posted:

Howard, great looking room! You can hardly see the washer and dryer!

Mayor Magoo, Looks like you have a great start for going into it blind! Keep it going and post more pictures when you can!

John, Beautyful car! Sure would be nice to have one now a days!

Paul, looks great! But I do think I seen a little dust on the river~! LOL If your drone makes it to Marks house, I think we all be better watching out! 

Johan, Nice job on the lumber load! Also I like the guy by the little shack!

Well for me I went and did my dive this morning, all excited about not having to work this afternoon, I got home and there was a lovely note from the CEO stating that she thought the grass was getting a little long! Needless to say I was wrong and another day goes by with no train room work! The CEO gets home and I am in the middle of mowing the lawn and she goes to her nice She Shed. I get done with all the yard work and in passing I let her know another day with no train work. She informed me that its ok we have the rest of our lives to work on stuff like that! LOL Who knows maybe tomorrow! 

Tomorrow is Saturday I hope everyone has FUN!

Mike. Thank you. The lumber load is only a repaint MTH load, but i think after repaint that is not looking so plastic than earlier.

Johan

So the new elevated line has 3 bridges and I wanted to do something unique for each one.  So 2 of them I named after my late Dad (Jerry Persing Memorial Bridge) and my Grandfather (Howard Morgan Memorial Bridge).  Side note my wife got a little chocked up when she saw what I was doing with the nameplates on those 2.  That left 1 bridge left and so in honor of the guy who cracked the whipped to get me going on this part of the layout this summer and also signed my TCA membership many years ago when you needed 2 signature to get in....I introduce the following.

DSC_0288[1]DSC_0290[1]

Attachments

Images (2)
  • DSC_0288[1]
  • DSC_0290[1]

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×