Skip to main content

I have to be in Cincinnati tomorrow so I am starting WEEKEND PHOTO FUN early.

I went to the Belk Bowl on New Years Eve and on my way back to the train I stopped into 300 S. Tryon Street and got to visit the great layout build by TW Trainworx.
IMG_5613 [2)

IMG_5615 [2)

IMG_5616 [2)

IMG_5617 [2)

IMG_5618

IMG_5619 [2)

IMG_5620

IMG_5625

IMG_5623 [2)

Let's see your pictures.

Scott Smith

Attachments

Images (9)
  • IMG_5613 (2)
  • IMG_5615 (2)
  • IMG_5616 (2)
  • IMG_5617 (2)
  • IMG_5618
  • IMG_5619 (2)
  • IMG_5620
  • IMG_5625
  • IMG_5623 (2)
Original Post

Replies sorted oldest to newest

Here's some photos of Marty Frizhenry's awesome layout.   It was August 2014, I was going to be in Marty's vicinity.  I emailed him asking if it would be possible to visit his layout.   He welcomed my family to his wonderful train room.   He only knew me from the OGR forum, but went above and beyond to share his layout with my family that day.  This is one of the best layouts that I've had the pleasure to visit.   Rest in Peace, Marty.   IMGP5336IMGP5337IMGP5338IMGP5339IMGP5340IMGP5343IMGP5344IMGP5346IMGP5347IMGP5348IMGP5349IMGP5350IMGP5351

Attachments

Images (13)
  • IMGP5336
  • IMGP5337
  • IMGP5338
  • IMGP5339
  • IMGP5340
  • IMGP5343
  • IMGP5344
  • IMGP5346
  • IMGP5347
  • IMGP5348
  • IMGP5349
  • IMGP5350
  • IMGP5351
Last edited by Mike McCutcheon

A 2019 Christmas Layout memory 

New Year, new set of 'memories' 

This first image shows the original track plan, especially focusing on the left side.  I have 2 AIUs (for non-DCS folks, they are used to control accessories and switches).  I had one planned for the right side under the plateau (the outline of which you can see on the right), and one on the left side.  The one of the left side developed a problem and wouldn't do anything, so I had to remove it.  WHen I did that I also removed all of the switches that it was going to conrol on that left side.  The only 2 switches left were the 2 that are port of the "CONNECT" trackage.  The 2 trains could still change sides but it took a lot more thought to pull it off.

The trackage marked with black are for a conventional steamer.

the yellow and orange are for my 2 PS3 tin-plate trains.

z - Track Plan - lower

This is the track plan for the plateau.  It ran what I call the 'Family Train' - the 2343 F3 set Dad bought in 1950 or so, along with all of the cars that he also bought at that time.  The elongated rectangle on the diagonal is an MTH arch bridge

z - Track Plan - plateau

Walt

Attachments

Images (2)
  • z - Track Plan - lower
  • z - Track Plan - plateau

Two weeks ago, I posted a few images of the concrete arch bridge I was building representing the PA Route 75 overpass in Port Royal, PA, as well as some images of the prototype. I am pleased to say that the model itself is now 100% finished, though the area around the base of the bridge on the east side of the tracks still needs to be completed. Here are a few photos of the completed model both from below and above. I'll post photos of the entire completed scene once that's done, hopefully not too far into the future.

IMG_4275_CorrectedIMG_4282IMG_4278IMG_4285

Attachments

Images (4)
  • IMG_4275_Corrected
  • IMG_4285
  • IMG_4278
  • IMG_4282
Last edited by PRRMiddleDivision

To honor the memory of Marty Fitzhenry.

A few years ago Gerry Morlitz had some of us over for a visit to his wonderful home layout.  I had a rundown section of town on my layout and wanted to add a graffiti covered car.  Rather than buy one I thought it would be a good idea to take a boxcar to Gerry's house and have folks sign it.  This way it would hold memories and be a good conversation piece for my layout.   At our last show at the club I placed it on the layout near where I was working the coal tipple all day as Marty had been on my mind and folks were reminiscing about past experiences with him 2 days prior at our Christmas party.

20191215_155940

If you look above the PRR insigna it will be clear why:

20191215_160020

Yesterday I again grabbed the boxcar and put it in the backpack I take with me to the shows.  It will be placed again on the layout next Saturday at our next show. He is missed.

-Greg

Attachments

Images (2)
  • 20191215_155940
  • 20191215_160020
PRRMiddleDivision posted:

Two weeks ago, I posted a few images of the concrete arch bridge I was building representing the PA Route 75 overpass in Port Royal, PA, as well as some images of the prototype. I am pleased to say that the model itself is now 100% finished, though the area around the base of the bridge on the east side of the tracks still needs to be completed. Here are a few photos of the completed model both from below and above. I'll post photos of the entire completed scene once that's done, hopefully not too far into the future.

IMG_4275_Corrected

Neal,

I travel over that bridge when I visit my parents who live in Walnut just outside of Port Royal. You nailed it. Great job.

PRRMiddleDivision posted:

Two weeks ago, I posted a few images of the concrete arch bridge I was building representing the PA Route 75 overpass in Port Royal, PA, as well as some images of the prototype. I am pleased to say that the model itself is now 100% finished, though the area around the base of the bridge on the east side of the tracks still needs to be completed. Here are a few photos of the completed model both from below and above. I'll post photos of the entire completed scene once that's done, hopefully not too far into the future.

IMG_4275_CorrectedIMG_4285

Neal,

Your modeling and photography is fantastic.  You really capture the look and feel of the prototype.  NH Joe

The new decade sees a PRR T-1 pulling an express out of the yard.  The 50s will not be good to this train.  The T-1 will be retired in less than two years, and express service as well as LCL will decline significantly as longer range and larger trucks become the preferred haulers.  For now, nothing beats watching a T-1 pass by at speed.

DSC_0003DSC_0003aDSC_0007

The T-1 is a Lionel.  The express cars, from left to right, are:  3rd Rail, GGD. Atlas.

Attachments

Images (3)
  • DSC_0003
  • DSC_0003a
  • DSC_0007
PRRMiddleDivision posted:

Two weeks ago, I posted a few images of the concrete arch bridge I was building representing the PA Route 75 overpass in Port Royal, PA, as well as some images of the prototype. I am pleased to say that the model itself is now 100% finished, though the area around the base of the bridge on the east side of the tracks still needs to be completed. Here are a few photos of the completed model both from below and above. I'll post photos of the entire completed scene once that's done, hopefully not too far into the future.

IMG_4275_CorrectedIMG_4285

PRRMiddleDivision posted:

Two weeks ago, I posted a few images of the concrete arch bridge I was building representing the PA Route 75 overpass in Port Royal, PA, as well as some images of the prototype. I am pleased to say that the model itself is now 100% finished, though the area around the base of the bridge on the east side of the tracks still needs to be completed. Here are a few photos of the completed model both from below and above. I'll post photos of the entire completed scene once that's done, hopefully not too far into the future.

IMG_4275_CorrectedIMG_4285

Outstanding work. The prototype is in remarkable condition for its age.

 

Scenery detail.   The long open hole becomes: 

Some of the detail was done on the work bench, a small modular insert that was installed from under the layout, then blended-in/finished after installation.  Woodlands Scenic rock molds/hydrocal castings. and detail.  Additional blending done with plaster-of paris, and drywall joint compound. 

 

Last edited by Mike CT
SIRT posted:

 

                                2020 LASH - UP...………….

 

B&O HOLIDAY LASH - UP [1)

B&O HOLIDAY LASH - UP [2)

B&O HOLIDAY LASH - UP [3)

B&O HOLIDAY LASH - UP [4)

 

B&O HOLIDAY LASH - UP [5)

B&O HOLIDAY LASH - UP [6)

B&O HOLIDAY LASH - UP [7)

B&O HOLIDAY LASH - UP [8)

B&O HOLIDAY LASH - UP [9)

 

Sirt,

I'm totally excited about your post. I have recently become fascinated with the B&O/C&O RR and have decided that it will be one of the railroads I run on the layout. Don't have many diesels yet but am looking. Thanks for posting.

Dave

luvindemtrains posted                            

 

I'm totally excited about your post. I have recently become fascinated with the B&O/C&O RR and have decided that it will be one of the railroads I run on the layout. Don't have many diesels yet but am looking. Thanks for.

Dave

 

          for some more B&O,   C&O...       have fun      

          click:   do you have B&O.....c&o?

 

 

Last edited by briansilvermustang

Thanks Dave. In O , it takes many years to collect all the items needed to model yesteryears train operations. I have picked up items as they came out, hoping to add to them in later on.

I have bits n pieces waiting until other supporting models are offered. Not a good thing. MFG's cater too much to holiday people.  

Everything should be in stock for those to buy in order to model a certain road. Everything should always be available to those who wish to model a complete road name. But marketing isn't up to that I guess?

I feel sorry for those who just entered the O hobby. They will never ever get the chance to aquire or model a certain road with all that is required. Especially with the loss of Weaver. It's sad that someone who worked there couldn't have continued the business. But I guess no one could make much of a profit in a dying model train market these days. Atlas and Lionel who bought Weaver molds raised the prices and screwed it all up.

We don't have that problem with H.O. Guess we O scale 3 railers will never shake that toy / stereo type?

Good luck in finding what you desire! 

BO [1)

BO [2)

BO [3)

     Probably will never see another B&O Sand Service car again. Thanks Joey H. for providing one!

 

Attachments

Images (3)
  • BO (1)
  • BO (2)
  • BO (3)
Last edited by SIRT

627E9C96-5FAB-4AD6-8211-8FE3717B4EA5Work in progress. This is an MTH RailKing advertised as  a GP7...it’s not. The grills on the long hood say “GP9”.  I would not have bought it had I knew this. The lettering on the long hood travels right thru all those louvers. Not a good situation, and I have noticed that many GP9 buyers avoided lettering in that area. (I think MEC might be an exception).  Anyway, this is the only way to get a QA&P switcher for those few of us that “need one”.  After I finish the paint and lettering, I need to buy an O gauge cowboy since fireman Dee Smith always wore a western hat on the job. Then life will be more complete. 

Attachments

Images (1)
  • 627E9C96-5FAB-4AD6-8211-8FE3717B4EA5

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×