Skip to main content

Replies sorted oldest to newest

The warehouse model is complete and will be delivered in a few days. Construction time was 62 hours. Last photo shows Lionel Legacy New Haven Ten-Wheeler #816 crossing the scratch-built truss bridge – built from basswood of various cross sections in 2014 - on my 10’-by-5’ layout. The other buildings in the photo are also scratch-built.

Photos by:

MELGAR

MELGAR_2020_0111_WAREHOUSE_135_PORCH_STAIR_RAILSMELGAR_2020_0112_WAREHOUSE_138_COMPLETEMELGAR_2020_0111_WAREHOUSE_137_PORCH_STAIR_RAILSMELGAR_2020_0113_18_NH_816_ON_BRIDGE_10X5

Attachments

Images (4)
  • MELGAR_2020_0111_WAREHOUSE_135_PORCH_STAIR_RAILS
  • MELGAR_2020_0112_WAREHOUSE_138_COMPLETE
  • MELGAR_2020_0111_WAREHOUSE_137_PORCH_STAIR_RAILS
  • MELGAR_2020_0113_18_NH_816_ON_BRIDGE_10X5

Alan... very nice work

Pete...good idea, looks good

Norm..clouds look great from here

MELGAR....great outcome on that project

I'm on a long project of a hotel behind an elevated arches, so far have everything printed for the hotel except the basement walls. The elevated arches need designing in CAD first.

Construction_29IMG_8621

 

 

 

Attachments

Images (2)
  • Construction_29
  • IMG_8621
Last edited by sidehack
sidehack posted:
I'm on a long project of a hotel behind an elevated arches, so far have everything printed for the hotel except the basement walls. The elevated arches need designing in CAD first.

Construction_29IMG_8621

Ray,

Exceptional! Just curious as to whether your input CAD file is 3d or just 2d with z-coord of surfaces specified only in the STL file. Also - what material?

MELGAR

Thx guys. I am still on the fence about them. They’re easy to paint over at least. This is the third going at the backdrop plus I changed all the lighting over to 5000K LEDs. Originally had 2800K halogens then 3000K LEDs but wanted to get away from the warm cast. Here’s some more backdrop painting experiments taken with my iPhone and uncorrected for cast (iPhone ‘warmify’ setting):

FB5B13A4-EBF5-4678-AED6-6D26125A6F6B5CA62A98-E5F7-4C6C-AACA-52FB80B959A09314C766-86C8-4274-8318-68F19E4E3471

Attachments

Images (3)
  • FB5B13A4-EBF5-4678-AED6-6D26125A6F6B
  • 5CA62A98-E5F7-4C6C-AACA-52FB80B959A0
  • 9314C766-86C8-4274-8318-68F19E4E3471
davidbross posted:
Norm Charbonneau posted:

Still painting clouds, not sure I like them though.

33C35FF4-398C-48E6-9BF2-55E4D15FC6BBCD8307AC-815E-4C3B-A5A8-075B31E50507BEBB640E-8D9B-489D-9144-286EEFD2093F

Norm, the clouds look great.   But I like the plain backdrop better.  I think the blue and clouds take attention away from your beautiful modeling.   But either way it looks great!!!!

Why is that? Perhaps too many? Like the buildings on  your layout, maybe less is more! 

MELGAR posted:
sidehack posted:
I'm on a long project of a hotel behind an elevated arches, so far have everything printed for the hotel except the basement walls. The elevated arches need designing in CAD first.

Construction_29IMG_8621

Ray,

Exceptional! Just curious as to whether your input CAD file is 3d or just 2d with z-coord of surfaces specified only in the STL file. Also - what material?

MELGAR

Melgar, everything is modeled in 3D first, what you see as the printed parts on the right are duplicates of what is in the computer, every section has pin holes to be able to line them all perfectly when gluing.

This so far is all PLA material but when I get into reinforcing and brackets behind etc. I'll use a PETG which is much stronger.

This is what the wire frame looks like showing all the different sections color coded

Construction_31

Attachments

Images (1)
  • Construction_31

Thanks for input fellas. I am still experimenting with the look. I wanted a more hazy sky so I am painting out clouds here and there and trying to blend the sky colors down to the scenery. The biggest hassle about all this is having to work up on the layout. I am trying to avoid a cartoon look and also don’t want it to look overdramatic. Still a ways to go.

C0FA242A-06A9-4D03-A92A-AEA8F40A7B1DA6BECC1A-4E15-4933-89D8-F441FE1068BE

Attachments

Images (2)
  • C0FA242A-06A9-4D03-A92A-AEA8F40A7B1D
  • A6BECC1A-4E15-4933-89D8-F441FE1068BE

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×