Skip to main content

Replies sorted oldest to newest

I decided not to use Homasote and just used a vinyl roadbed called Flexxbed made by Hobby Inovations.  Here is a picture of what it looks like going down:

IMG_20190618_185448

The Flexxbed is easy to install and I am very happy with the noise level.  The main reason I didn't use Homasote is because of the time and difficulty involved in cutting all the pieces for my layout. Most of my layout is open grid benchwork, so I would have had to do a lot of cutting. Here is a picture of a finished section of the layout so you can see what it looks like with ballast.

IMG_20190517_130230

 

 

 

Attachments

Images (2)
  • IMG_20190618_185448
  • IMG_20190517_130230

I use the 4' X 8' green/blue rigid foam boards from Lowes. They come in both 3/4" and 1" thick variations. I use liquid nails to glue it to the plywood base and place anything heavy over it until it cures (tools, books, etc.). The boards can be cut and trimmed with a variety of tools but I use a long and very sharp commercial butcher knife. 

After it's installed, I mask off any roads with duct tape and paint the foam board with an earth brown latex paint from Lowes and sprinkle it with yellow and green fine turf as I go along while the paint is still wet, so it adheres to the paint. That gives you an instant ground cover for the whole layout. I then go back and peel off the duct tape and paint the roads a flat black or grey concrete color. Any seams can be covered with duct tape before painting and painted over. You can use a flexible vinyl type joint compound to do the seams, but I find it unneccesary. Once everything is dry, you can then lay your track wherever you like and install your trees, poles and accessories.

Note - I have subsequently sprinkled fine black cinder over the turf in the yard for a more prototypical look.

Attachments

Images (4)
  • Foam 2
  • ROAD 1
  • YARD 9
  • YARD 12
Richie C. posted:

I use the 4' X 8' green/blue rigid foam boards from Lowes. They come in both 3/4" and 1" thick variations. I use liquid nails to glue it to the plywood base and place anything heavy over it until it cures (tools, books, etc.). The boards can be cut and trimmed with a variety of tools but I use a long and very sharp commercial butcher knife. 

After it's installed, I mask off any roads with duct tape and paint the foam board with an earth brown latex paint from Lowes and sprinkle it with yellow and green fine turf as I go along while the paint is still wet, so it adheres to the paint. That gives you an instant ground cover for the whole layout. I then go back and peel off the duct tape and paint the roads a flat black or grey concrete color. Any seams can be covered with duct tape before painting and painted over. You can use a flexible vinyl type joint compound to do the seams, but I find it unneccesary. Once everything is dry, you can then lay your track wherever you like and install your trees, poles and accessories.

Note - I have subsequently sprinkled fine black cinder over the turf in the yard for a more prototypical look.

Richie.C, in the first photo that you posted the color looks almost white, it that the Blue or the Green.

 

Last edited by ThomasT
Richie C. posted:

I use the 4' X 8' green/blue rigid foam boards from Lowes. They come in both 3/4" and 1" thick variations. I use liquid nails to glue it to the plywood base and place anything heavy over it until it cures (tools, books, etc.). The boards can be cut and trimmed with a variety of tools but I use a long and very sharp commercial butcher knife. 

After it's installed, I mask off any roads with duct tape and paint the foam board with an earth brown latex paint from Lowes and sprinkle it with yellow and green fine turf as I go along while the paint is still wet, so it adheres to the paint. That gives you an instant ground cover for the whole layout. I then go back and peel off the duct tape and paint the roads a flat black or grey concrete color. Any seams can be covered with duct tape before painting and painted over. You can use a flexible vinyl type joint compound to do the seams, but I find it unneccesary. Once everything is dry, you can then lay your track wherever you like and install your trees, poles and accessories.

Note - I have subsequently sprinkled fine black cinder over the turf in the yard for a more prototypical look.

Richie C. - thanks for the info - I plan on using the foam using your technique- your layout looks great and I may steal a few ideas - I'm curious to know  the dimensions of your layout - Thanks again.

ThomasT posted:
Richie C. posted:

I use the 4' X 8' green/blue rigid foam boards from Lowes. They come in both 3/4" and 1" thick variations. I use liquid nails to glue it to the plywood base and place anything heavy over it until it cures (tools, books, etc.). The boards can be cut and trimmed with a variety of tools but I use a long and very sharp commercial butcher knife. 

After it's installed, I mask off any roads with duct tape and paint the foam board with an earth brown latex paint from Lowes and sprinkle it with yellow and green fine turf as I go along while the paint is still wet, so it adheres to the paint. That gives you an instant ground cover for the whole layout. I then go back and peel off the duct tape and paint the roads a flat black or grey concrete color. Any seams can be covered with duct tape before painting and painted over. You can use a flexible vinyl type joint compound to do the seams, but I find it unneccesary. Once everything is dry, you can then lay your track wherever you like and install your trees, poles and accessories.

Note - I have subsequently sprinkled fine black cinder over the turf in the yard for a more prototypical look.

Richie.C, in the first photo that you posted the color looks almost white, it that the Blue or the Green.

 

Must be just the lighting or camera - here's a photo of some of the board for a new extension I'm working on.

 

Wedge 3

Attachments

Images (1)
  • Wedge 3
GEM posted:
Richie C. posted:

I use the 4' X 8' green/blue rigid foam boards from Lowes. They come in both 3/4" and 1" thick variations. I use liquid nails to glue it to the plywood base and place anything heavy over it until it cures (tools, books, etc.). The boards can be cut and trimmed with a variety of tools but I use a long and very sharp commercial butcher knife. 

After it's installed, I mask off any roads with duct tape and paint the foam board with an earth brown latex paint from Lowes and sprinkle it with yellow and green fine turf as I go along while the paint is still wet, so it adheres to the paint. That gives you an instant ground cover for the whole layout. I then go back and peel off the duct tape and paint the roads a flat black or grey concrete color. Any seams can be covered with duct tape before painting and painted over. You can use a flexible vinyl type joint compound to do the seams, but I find it unneccesary. Once everything is dry, you can then lay your track wherever you like and install your trees, poles and accessories.

Note - I have subsequently sprinkled fine black cinder over the turf in the yard for a more prototypical look.

Richie C. - thanks for the info - I plan on using the foam using your technique- your layout looks great and I may steal a few ideas - I'm curious to know  the dimensions of your layout - Thanks again.

It's hard to give a figure because of the design. The layout to the right of the tunnel is a double loop, upside down U-shaped layout in a separate room with the right side about 14' long; the crossover about 10' across; and the left side leg 10' long. There was a full wall to the left of the tunnel, which I cut in half and mated up the yard to the left side leg. The yard is 4' wide by 10' long. The outer loop extends all the way around the yard and back and one of the "sidings" actually connects on both ends to the main loop, although I have it switched so I can turn it off and store a train there. I run Legacy, DCS and a small amount of conventional on the layout.

Feel free to "steal away" and ask any questions - that's what the Forum is for.

Recent video attached, although I've since moved the yellow intermodal crane and installed the Lionel loader and unloader where it used to be. 

Attachments

Videos (1)
COMPLETE LAYOUT MOVIE

Add Reply

Post
The Track Planning and Layout Design Forum is sponsored by

AN OGR FORUM CHARTER SPONSOR

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×