When I built my last layout, I cut the 6-wire controller-to-terminal-strip harness so I could run the wires below the last layout. As I was tearing down that last layout, I forgot to label the each of the 6 wires. I took a guess at how to re-connect them but struck out and wasn't about to go through all 720 wire-to-to combinations.
My instructions don't have a wiring diagram nor does my copy Toy Train Repair Made Easy. I couldn't find much online.
If anyone has a guide for "this wire from the controller goes to this wire on the terminal strip" I'd greatly appreciate it. Otherwise, it's off to the LHS.