Skip to main content

Has anyone married a 2006 era Cruise Commander (CR-5.0 with R2LC-08) to a modern ERR RS board like the ones currently available from 3rd Rail? My RS powers up immediately with the whistle stuck on when power is applied in command mode. It will not respond to any commands. I am using the 4 pin connector on the CC (track power and serial) with factory cables.

This older CC board ran a Lionel 3 board arrangement for years no problem. This new ERR RS board ran fine with a modern R4LC based Cruise Commander. 

Wondering if the serial line is loaded down a bit on these older CC boards.

I tried disconnecting the serial return with no effect.

 

 

Last edited by Norm Charbonneau
Original Post

Replies sorted oldest to newest

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×