Skip to main content

@Lehigh74 posted:

Some parts for the remote (50-1002) are hard to come by or obsolete.  MTH bought up all the parts they could and changed some that they couldn’t get.  The new PN for the remote (with changed parts) is 50-1038.  It was scheduled for April release, but in think it’s now September.

well thats good but I am also seeing that this run for April now September will be the last ones built do you know anything about that?

@Mark Boyce posted:

Isaac, Yes this was scheduled to be the last run of the remote even before it was announced that MTH was closing in 2021.  I ordered a 50-1038 a few months ago.

That is a huge shame, I am really not a fan of the app I guess I will have to get that backup remote in case. I just hope the company splitting off from MTH to handle DCS and protosound doesnt make the WiFi app madatory.

Your Quote (edited)

I also have a question about MTH making the DCS remote, my old TIU from like 2013 has some problems and 2 channels are broken so I was looking to get it replaced with a newer one and I decided to get a backup DCS remote too but apparently they dont make the DCS remote anymore? have they fully switched over to Wifi running trains? I really hope not cause the DCS wifi app is really not good in my opinion was wondering if anyone had any info on this. Also does anyone know where I could find one of the modern TIUs with USB port to buy all the ones i found are the old style from like 2014 and earlier. Thanks in advanced 

PS I am aware MTH is on course to closing down but I had no clue they were just gonna get rid of DCS in favor of an app if they didnt close that seems like a massive mistake

My Comments

Ok Let me say some things in the order you posted above. As for repairing the TIU you currently have there are several people on here that do repairs, Gunrunnerjohn being one of them. You can get the current Version L TIU's now and some dealers have them in stock. Check with Mr Muffin, Nicolas Smith, Legacy Station, Patrick's and of the big dealers then go to the local Hobby shops and check. I know I just recommended Alloway Trains to someone from Hawaii and they sold him their last TIU. BUT they are out there. As for making the DCS Remote, MTH is making one more run and they have NOT arrived yet but are due in September. The WiFI app is different and I agree I prefer the Hand held Remote, but with that being said, there are good things about the WiFi app (upgraded to the $24.95). For one adding switches and routes are a breeze. We as humans do NOT LIKE CHANGE! Having said that I find that the more I use the app the easier it gets and the more fun it becomes and YES I STILL USE MY REMOTES (I have 4 and another on order). The modern (Version L) TIU I already discussed above. Your last comment is WRONG. "PS I am aware MTH is on course to closing down but I had no clue they were just gonna get rid of DCS in favor of an app if they didnt close that seems like a massive mistake" They are not getting rid of DCS. DCS is the operating system. They are discontinuing the REMOTE! DCS will Always be around it may or may not have a group of Former MTH Employees running a separate company to support it but regardless it will always be here. There are to many running it and it is, (DISCLAIMER: "IN MY OPINION"), far superior to anything else as it can, with the upgraded Wifi App, Run 99% of Lionel's Legacy features. NO OTHER APP OR SYSTEM CAN DO THAT! Yes you still have to buy the 990 Legacy system and a SER2 but you DO NOT need to use the LEGACY REMOTE!

One more note. ANY TIU, after Ver C (I think) can be upgraded thru the Serial port. Upgrading sounds threatening, But as Barry Brokowitz once told me at one of his seminars. "Get over it, it is easy". He was Correct. I had built up a fear that did not need to be there.

Sit back, Relax, Take some deep breaths and ENJOY your trains and the system you have. As you get more comfortable you can expand upon it and bring enjoyment into full Bloom. You have NOT made a mistake with DCS and there are PLENTY of people here that will ALWAYS help you. Yes, there will be die hard Lionel fans who will shoot it down just as die Hard MTH fans shoot down Lionel's systems. You have a great system, expand upon it, do NOT be afraid to try the Wifi App, and ALWAYS ENJOY THE TRAINS!

We are all simply HELPER ENGINES tagged into your consist if needed! Throttle Up to Notch 8 and get moving!

the day has finally come the first back table is being built. It will be 150 inches by 40 inches and most of the other tables will be built outwards from it. It will be 47 inches tall so I can do work under the tables and have a nice view. Not a fan of short train tables. Will post more today after the tables completion.

NEW ARRIVALS today. Its a good day got some new train stuff in the mail. 

 

got a atlas double track truss bridge for a lift out section on the layout, its used and needs a tad bit of repairs but I am a very big fan of how it looks. Still need to get another single bridge but this is a pretty big need taken care of.

I also got an MTH Norfolk Southern AC6000. Always been a huge fan of AC6000s now I have a beautiful Norfolk Southern one.

 

also got these factory sealed never opened K-Line Pennsylvania F3 units

 

 

these are probably one of my most detailed diesels they are absolutely gorgeous. These are also my first Pennsylvania diesels, very excited to get some PRR passenger cars for them and the new PRR S1 by lionel.

Construction on the next 2 tables should begin by next week.

The day has finally come for the next table, The next table will be 80 inches by 37 inches and have the control system under it.

Wood was bought and cut today, will be built tomorrow or tonight we will see.

some experimental planning has been going on in the layout with more sidings.

 I also added this area where the yard table and mainline table will be connected with a crawl space underneath to reach the open area at the start of the yard. 

 

 

very excited to build more and finish it up, goal is to have the wood work finished by end of October

Next will be the final back wall tables, then the yard tables, then the middle and then the outside tables

Its all coming together

Attachments

Images (3)
  • mceclip0
  • mceclip1
  • mceclip2

Good morning Isaac,

I read this complete thread this morning.

Very exciting!

Keep up the good work, and thank you for sharing your adventures.

Many of us are vicariously following your build progress.

Also, a shoutout to all the people who have provided great suggestions to improve what was already a fine start.

This is a GREAT hobby for so many reasons, and this thread demonstrates in action, the joy and satisfaction it provides us.

Keep up the good work.

Jerry

Isaac, really enjoying following your build progress!  Your pace is keeping me motivated to stay active on my layout.  Keep up the great work!

I have also been following your progress Michael those backdrops you put up are fantastic and I was actually thinking about looking into something like that on my layout cause they are so good looking although they sure do look like a hassle to put up. Keep up the great work on your own layout!

Hey everyone I have finally returned to model trains, after loosing all my layout plans last year to computer issues and as I am sure all you know the price of wood has been crazy recently. So my layout plans and work on the layout in general have been entirely in standby phase for over a year now. With the price of wood going down I finally recreated my plans for the layout and I am happy to report layout work should restart after Christmas.

https://youtu.be/lAr01nCtCo4

I went over the refined layout plans and ran some of the engines I acquired in my year off in a video on my Channel O scale Everyday if anyone is interested.

The recreated plans in scarm pretty close to the original plans.

I cannot wait to fully get back into trains and truly start making some progress on the layout, because the benchwork is just the beginning!

Attachments

Images (1)
  • Layout Plans scarm
@Sean007 posted:

Excellent plan so far!

How is progress going?

I think that that size layout could keep you busy for a lifetime.

thank you very much

Progress has been at a complete stand still for over a year now with wood prices being so high. But after Christmas work will begin again. So far the entire back tables and the L table to the peninsula have been built. Next is the yard table which will be built in 3 sections.

I very much hope it does 

Add Reply

Post
The Track Planning and Layout Design Forum is sponsored by

AN OGR FORUM CHARTER SPONSOR

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×