Skip to main content

I have an old Lionel 22.5* tinplate crossover on my layout.  Unfortunately the outside rails are attached to a steel base making it unusable in my signal system, ie train wheels have to short the outside rails to give a signal occupancy indication, but the steel base of course defeats this.  Ross makes a 22.5* crossover but its not tinplate, though I understand there maybe Ross track to O gauge adapter pins available.  The Ross site does not show how its crossover  outside rails are connected (all shorted together or separate).

Anyone using this and can help?

Original Post

Replies sorted oldest to newest

I haven't dealt with a 22.5° crossover, but I once solved a similar problem with a 90° crossing with a stamped steel base.  Before I go into it, would you please let us know the Catalog No. of this item or, better, post a picture (both top and bottom)?  I'm not sure I understand what you're working with.

 

Steven J. Serenska

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×