Skip to main content

2 replies

2466WX Tender

T Tman129OGR Forum Member DIGITAL SUBSCRIBER

I did a clean/lube on my PW 2466WX Whistle Tender, cleaned/polished the armature plate and brushes, but am having a problem with the solenoid in the relay. When I push the whistle activation button, it hums, but the relay doesn't make contact. I pushed down on the tabs to the right from the base plate, raising the contact on the left, and I have a very strong whistle. I assume the solenoid is an electro magnet that is to lift the plate to make the relay contacts, how do I get this to function properly.

Thanks in advance - Tony

Attachments

Hide
Images (1)
  • 2466WX: Relay is on the right with copper contacts on its bottom left. The tabs I pushed down on stick out near the bottom right, raising the contact on the left.
Original Post

Replies sorted oldest to newest

T Tman129OGR Forum Member DIGITAL SUBSCRIBER

Larry, Your point above, made me think. I'm using a PW ZW (275) with a brand new Cab 1L set and PowerMaster. I was using the Cab 1L setup when the relay wasn't making contact, so I went to transformer power with its rectifier, and it works. So the problem appears to be in the Cab 1 setup.

Any suggestions for trouble shooting the Cab 1L setup? Their brand new.

Tony

Add Reply

Tags: Whistle Tender, relay, 2466WX
Views: 218
Post
This forum is sponsored by Lionel, LLC

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×