Re: 3-D Printer to Make Lionel Postwar Scale F3 Steps?

Johnsgg1OGR Forum Member SUPPORTING MEMBER

I have a set of Postwar Scale Lionel ABA Milwakee Road F3s, 6-34586. Several of the cab steps are broken off. Wondering of someone can make, or knows someone who can make these steps. I showed an example to a local person with a 3D printer but he said the steps are too small for his printer with a 4mm nozzle.

Pictures below. Color doesn't really matter. I can paint.

Attachments

Show

9/29/224:32 PM

❤️ 1

Original Post

gunrunnerjohnOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

You'll need measurements, or even better a sample for someone to duplicate it. I'm sure it's possible, @AlanRail prints tender handrail stanchions in copious detail, those steps look like a candidate.

9/29/225:06 PM

❤️ 1

Skip to main content

Attachments

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

OGR Forum Supporting Membership Required

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

OR

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGRwith a DIGITAL SUBSCRIPTION!

Please wait...

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!