Skip to main content

OK it's fall and train season once again.  Here are more updates.

Let's have a look down the tracks on module 3. All signals are there (14 in all) but not yet operational. Tunnel lighting is operational. 5 tracks (2 from elevated line) merging on to 3 track subway. The Baltic Street station is in the distance.

20171015_11171720171015_11173520171015_11182820171015_111842

Attachments

Images (4)
  • 20171015_111717
  • 20171015_111735
  • 20171015_111828
  • 20171015_111842

I have to build curved walls and it is not easy to do so using 1x6 plywood.  There are kerfing methods, but wood can sometimes crack, so I decided to cut pieces between 3 and 3.5 inches long and staple them together with 1.5 x 2 inch flooring staples, two on top and two on bottom. The ledges are easy to curve using the kerfing method. I have reused walls from my old layout in some instances.

20171011_23005120171011_23021720171011_23025720171013_11432720171013_114348

Attachments

Images (5)
  • 20171011_230051
  • 20171011_230217
  • 20171011_230257
  • 20171013_114327
  • 20171013_114348
Joe P posted:

I have to build curved walls and it is not easy to do so using 1x6 plywood.  There are kerfing methods, but wood can sometimes crack, so I decided to cut pieces between 3 and 3.5 inches long and staple them together with 1.5 x 2 inch flooring staples, two on top and two on bottom. The ledges are easy to curve using the kerfing method. I have reused walls from my old layout in some instances.

20171011_23005120171011_23021720171011_23025720171013_11432720171013_114348

Awesome technique, I always wondered how I could build curves walls. Your work is incredible

Hello Joe P 

Good running into you again at the Mass Transit Modelers Meet.  WOW -- great derailment --  all that column steelwork and damage,  and not a dent or scratch to the subway cars. A testament (heh) to the MFG, --aka  LIONEL CAR CO. (heh),  Great shots anyway ! 

I have been following your work progress regularly -- keep up the outstanding work and progress !!

I had a whoopsie on my O-Scale NYC EL System some years ago in 2011 during operations -- luckily slow speed while departing a local station so the train stopped short of wiping out the tower -- the towerman needed to change his pants, heh   Not much damage as the photos below show.  Glad it wasn't a skip station thru express at full speed !

I happened to have my camera handy so I got the quick shots before the derailment was cleared to get operations going again -- no hearings, investigations, studies, reports, bla bla,  just get 'em rerailed and rolling again !

Regards !! Joe F

 

irt-train-splits-switch-on-the-el_5696201262_oirt-train-splits-switch-on-the-el_5696201264_oirt-train-splits-switch-on-the-el_5696201274_oirt-train-splits-switch-on-the-el_5696201278_o

Attachments

Images (4)
  • irt-train-splits-switch-on-the-el_5696201262_o
  • irt-train-splits-switch-on-the-el_5696201264_o
  • irt-train-splits-switch-on-the-el_5696201274_o
  • irt-train-splits-switch-on-the-el_5696201278_o

Bi-level subway construction showing main line on lower level as it meets ramp to elevated. The ramp is still in the subway on this module. There will be a building similar to the one containing the tunnel portals where the IND heads out of the subway toward Smith 9th streets. The connecting module will have a ramp in a cutout as is heads toward a Duel Contracts El. Fun stuff, but difficult.

This is the main line subway with ramp construction to the right.

20190123_134247

Main line subway below and ramp under construction.

20190123_134159

 

Attachments

Images (2)
  • 20190123_134247
  • 20190123_134159
Last edited by Joe P
Joe P posted:

Bi-level subway construction showing main line on lower level as it meets ramp to elevated. The ramp is still in the subway on this module. There will be a building similar to the one containing the tunnel portals where the IND heads out of the subway toward Smith 9th streets. The connecting module will have a ramp in a cutout as is heads toward a Duel Contracts El. Fun stuff, but difficult.

This is the main line subway with ramp construction to the right.

20190123_134247

Main line subway below and ramp under construction.

20190123_134159

 

Thanks Joe for posting your progress here!  There are so many nice subway sets that seeing folks build subway layouts is a treat!  PLEASE keep updating us on a regular basis....

Thanks!

Joe, The signals would be for my club’s layout( Train Masters  of Babylon LI NY)  Now  that I know the lenses are available, I will work on getting a whole series of subway signals into our budget.  We could use several dozen but I am not sure when we would be able to do them. Thank you for your prompt reply and your instructions on how you made your signals FJI 

Subway ramp to tunnel portals under construction. Portals will be part of a substation building placed over the solid wood tunnel walls. The tunnel entrance roadbed is 6.75 scale feet higher than the main subway roadbed. The ramp will continue in a cutout until it rises to 8 scale feet above ground (32 scale feet above the main subway roadbed) where it will meet a standard dual contracts El. Also shown is the El constructed 6 years ago using Plastruct. It is sturdy but I may want to construct the girders with another material, possibly Masonite.

20190204_22294120190204_22304020190204_22325720190204_22365420190204_22383520190204_223847

Attachments

Images (6)
  • 20190204_222941
  • 20190204_223040
  • 20190204_223257
  • 20190204_223654
  • 20190204_223835
  • 20190204_223847
coach joe posted:

Joe your subway work, past and present is so realistic you must have spent plenty of time down there.  Do you work for the NYC Subway?

Rode the trains for years. I'm retired now but took motorman's test 2 years ago.  Would you believe they called me for a job at age 61? I declined it. Just wanted to see if they would, in fact, call me.

Here is a substation that sits over the tunnel portals.

20190225_18470520190225_184711

Tunnel portals leading to the ramp for the elevated.

20190405_214720

Start of the ramp connecting the subway to the elevated.

20190410_17560320190410_175612

Working on the next module. Getting the roadbed down. The two objects up front contain the walls to the express station and the extension of part of the platform into the tunnel. Resting on top of the objects will be a mezzanine that anchors stairs to the street and stairs to the station platform. The platform stairs will be part of the next module.

20190422_180026 [1)

This is a view down the "street" over the subway of the module under construction posted earlier and shown again here. In this view generated by RRTrack 3D viewer, there is an image of the 3 track subway station under the street. The future elevated shows the continuation of the ramp at the left and a proposed elevated station to the right. Notice how the el curves right and grades downward at roughly 2.5 percent to what will be an embankment curved station. Always loved the view of els in the distance curving from the street, especially into tunnels. Could not model tunnel ramp due to space considerations.

Looks a little like the view down Stillwell Ave from the Belt Parkway.

elevatedStation

Attachments

Images (7)
  • 20190225_184705
  • 20190225_184711
  • 20190405_214720
  • 20190410_175603
  • 20190410_175612
  • 20190422_180026 (1)
  • elevatedStation
Last edited by Joe P

Hello Strap !

Still hanging in I see ! 

Well, its beginning to appear obviously that my old buddy Joe P is the "Subway guy"  and Joe F   (that's me)  is the "EL" guy".  And our pal  Steve (aka SIRT) is the main Staten Island  modeler Guy.

I decades ago contemplated installing  a subway line UNDER the streets that have my EL above them  --- but figured I have ENOUGH to run alone by myself with 3 EL trains running on the EL -- and two streetcar lines below the El on the street.  And just me trying to handle it all.  So, no Subway Line separately below the streets on my system.  I am happy with what I have accomplished so far (see below) and all of it operates and works well ! 

Joe P's Subway Layout  (with a section of EL also)  will look great WHEN he finally gets it all finished -- I am sure of that !

I have to get there some day when it done to get some great photos of it all ... regards - Joe F

IMG_3812

img_0389_11302420005_oIMG_4532img_2145_19964732396_oIMG_4537

Attachments

Images (5)
  • img_0389_11302420005_o
  • IMG_4532
  • img_2145_19964732396_o
  • IMG_4537
  • IMG_3812
Last edited by Joseph Frank

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×