Skip to main content

Sorry for all the posts but I think I have 3D fever! Here's another part I've always wanted that I sketched up last night. The idea was to install a Kadee on one of my 3RS upgrade projects with a minimum of cutting, grinding, and gluing. I wanted to mount a Kadee to the correct height with some structural integrity and a minimum of parts. In the past I would have hacked this out of styrene or brass (or maybe both). This adapter bolts right up to the rear tender shell screws. Still a bit rough but this allowed me to test fit the major dimensions. The Q2 is relatively plain at the drawbar so other than a higher quality print, I may add a brake hose mount. With some mods, I can probably get this to fit a lot of my projects in the future.

6D96E204-227C-4BBB-B5E5-941B8C0DD45B

E0265F23-DF64-4F83-8882-7C9927F87CA9

8E7ACE22-295D-4F18-8CC2-87FA40FDABAF

7DCBA560-C936-4595-BE3E-B846C3563049

Attachments

Images (4)
  • 6D96E204-227C-4BBB-B5E5-941B8C0DD45B
  • E0265F23-DF64-4F83-8882-7C9927F87CA9
  • 8E7ACE22-295D-4F18-8CC2-87FA40FDABAF
  • 7DCBA560-C936-4595-BE3E-B846C3563049
Last edited by Norm Charbonneau
Original Post

Replies sorted oldest to newest

Add Reply

Post
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
Link copied to your clipboard.
×
×