Skip to main content

I had an idea the other night. Many O scalers and O gaugers are always complaining (especially with a new catalog release) about how the big 2 (Lionel/MTH) aren't always prototypically accurate on the smaller details of their models (e.g. the E-L #1700 SD45, which is actually an SD45-2). What is MTH or Lionel created a web-based portal where hobbyists could create CAD models of their desired engines with prototypically accurate details, then had MTH 3D print the shells in plastic or metal?

Original Post

Replies sorted oldest to newest

pittsburghrailfan posted:

I had an idea the other night. Many O scalers and O gaugers are always complaining (especially with a new catalog release) about how the big 2 (Lionel/MTH) aren't always prototypically accurate on the smaller details of their models (e.g. the E-L #1700 SD45, which is actually an SD45-2). What i(f) MTH or Lionel created a web-based portal where hobbyists could create CAD models of their desired engines with prototypically accurate details, then had MTH 3D print the shells in plastic or metal?

I do not believe it will happen because of the time it takes to create the CAD the cost would be to high no one would be able to buy it.

create your own and print it your self would be a better thing.

these places are supposed to make it easier to create and share designs.

www.onshape.com

www.thingiverse.com/

 

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×