Skip to main content

Mario, 

I know this topic is well over two years old, but if you can help me explain the wiring arrangements to operate and control the original RailSounds 2/2.5 board (as well as the ElectroCoupler and back up light) with the new Cruise Commander, I'd really appreciate it.

I'm doing the same with the Chesapeake & Ohio Yellowbelly Hudson that came out a year before this locomotive, and they likely have the same wiring requirements.

So after our test run, it seems I had a dead Chuff Generator, and there was some mechanical difficulties from the road crew, so back to the shops @harmonyards. There, the mechanical shop was able to find some serious issues which were quickly dispatched.

some serious power…

IMG_7168

some serious weight for the tireless drivers…

IMG_7173

lowered to match the tender height…

IMG_7181

and some serious fine tuning…

next? Restore the awesome sounds…

Thanks Pat!

- Mario

Attachments

Images (3)
  • IMG_7168
  • IMG_7173
  • IMG_7181
Videos (1)
IMG_7192

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×