Skip to main content

Replies sorted oldest to newest

Does anyone know if the O scale rail joiners from Atlas would fit Gargraves track?  I think they would look very good and cover the gap between the rails, as they have the bolt pattern and the taper cut on the ends.  I don't care about conductivity, as I would still use the GG pins.  (They are in the catalog under Nickel Silver Track Accessories.)

 

Thanks.

 

Mike

Originally Posted by MdMikey:

Does anyone know if the O scale rail joiners from Atlas would fit Gargraves track?  I think they would look very good and cover the gap between the rails, as they have the bolt pattern and the taper cut on the ends.  I don't care about conductivity, as I would still use the GG pins.  (They are in the catalog under Nickel Silver Track Accessories.)

You would have to modify the ends of the track to accept the Atlas rail joiners by grinding off the gargraves track below the top of the tie.   Gargraves track (left) hooked to a piece of Atlas track (right).

  

Thanks.

 

Mike

 

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×