Skip to main content

My Western Maryland 44 toner with ps3 has been in storage for the last six months. Ran fine in both command and conventional before storage. Put it on the layout this evening and it will not respond in command. Got it to start in conventional, but will not cycle out of neutral. I left it on the track with 18 volts for ten minutes, but this did not solve the problem. Anyone have any thoughts on what could be wrong.
Thanks in advance, John G.

Original Post

Replies sorted oldest to newest

@JGTRAINS posted:

Got it to start in conventional, but will not cycle out of neutral. I left it on the track with 18 volts for ten minutes, but this did not solve the problem. Anyone have any thoughts on what could be wrong.
Thanks in advance, John G.

If it's PS3, it doesn't need to charge for that long. About two minutes should have worked.

What transformer are you using?

Are you lowering the voltage before pressing the direction button?

Does it come up if you press read on the remote? (It does, but you're saying it doesn't respond?)

Add Reply

Post
The DCS Forum is sponsored by

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×