Skip to main content

unknown cast iron loco with plastic wheels

Found this cast iron clockwork loco with plastic wheels. Can anyone identify the motor? The bottom of the mechanism is mostly closed.

unknown cast iron loco with plastic wheels clockwork rearunknown cast iron loco with plastic wheels other sideunknown cast iron loco with plastic wheels under side

broken cowcatcher should be easy enough to fix. Looks like a single band no. 17 Ives possibly? 

Anyone ever hear of plastic replacement wheels for zinc-pest infested locos?

Attachments

Images (4)
  • unknown cast iron loco with plastic wheels
  • unknown cast iron loco with plastic wheels clockwork rear
  • unknown cast iron loco with plastic wheels other side
  • unknown cast iron loco with plastic wheels under side
Original Post

Replies sorted oldest to newest

I think you are correct about it being a #176 from 1930. Everything seems to match up except the nylon wheels. Someone must have manufactured them for this purpose as the rear drive wheels have brass bushings and the drive rods are mounted to a raised nylon ferrule. The pin on the drive rod does not go all the way through the wheel.

The chassis also has the third rail slider as you can see in the one picture.

176 from 1930 only176 cast iron loco w no. 12 tender

Attachments

Images (2)
  • 176 from 1930 only
  • 176 cast iron loco w no. 12 tender
Last edited by Jim O'C

I have an Ives with that same basic late motor, but with stamped wheels instead of the die-cast.  The body appears to be a 5th series No. 1, but has that very late motor in it.  Interesting to say the least.  It appears to me that this motor has both Ives and AF characteristics at this point.

1930Ives5thSeries

It never ceases to amaze and confuse me why companies like Ives and AF had such a plethora of body styles with minute differences in their cast iron locomotives.  I would think that they would have made a couple of models, say a small locomotive and a larger locomotive, and stuck with those over the years.  Perhaps a smaller version with a cheaper motor as a 3rd option for a loss-leader.  Could it be that the wooden pattern got damaged or so worn out, that they just churned out a new one, and the differences can be chalked up to the style, taste and artistic interpretation of the current pattern maker?  Or were the little details changed on purpose by the manufacturer for a reason?  We may never know... but regardless, it sure does give us a lot of neat locomotives to collect!

Attachments

Images (1)
  • 1930Ives5thSeries

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×