Skip to main content

Okay, I have been in this hobby since childhood.  That's over sixty years since I became aware of trains.  I have never seen one of these.  I read alittle bit about them just now.  I'm trying to figure out how the pole collected power from a catenary.  Or maybe I just misunderstood what I read.  The wheel is facing the wrong way, if it ca be called a wheel.

Rail bonder

Attachments

Images (1)
  • Rail bonder
Original Post

Replies sorted oldest to newest

Dan, you'll have to await the closing of the "4014" thread, then tempers can cool off, and some good thinking will resume.

Kinda reminds me of what I see, when a stray dog comes into the neighborhood, and all of the neighbors dogs will "Pack Him".  Now they're diggin stuff out of "Hot Water's" past from something that happened on a run of the 4449, on the old IC Line, and who really gives a sh*t, anyway!.................................. 

Last edited by Brandy

I wonder how Lionel came up with he conical pickup on the end of the pole ? Surely someone saw a prototype somewhere. M4 seems to have a rotating wheel on it's pole. If the catenary existed why use another form of power for propulsion ?  Old street cars that I have seen also had pole hooks on each end of the roof. Whenever parked for any time they would lower the pole for safety sake.  You can see this on the trolleys in New Orleans the ones parked at the terminal all have their pole down in the hook. However if such a conical pickup like on Lionel's model exists that would support your theory. 

I remember as a child here in Birmingham they tore the trolley tracks up and replaced them with electric buses that drew power from a parallel dual wire catenary and every time the bus turned a corner the driver would have to get out and get the pole back on the wires.  I don't think the system lasted ten years before they ditched it if favor of diesel buses.  I was only about seven but I missed the trolley the first time I rode on one of the electric buses. The trolleys were much faster !           j

dkdkrd posted:

Apparently these are used for welding rails together, a common practice for today's railroads.  The pole was not used for transporting, if I recall.  It was only raised while stationary to pick up the electrical power to achieve the rail weld. 

Others may clarify, correct, or amend.  I'm certainly not the expert!

 

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×