Skip to main content

The turntable bridge needs the bogies at each end adjusted.  Don't know how the "upgrade kit" bogies are attached or if they can be adjusted.  The "old" bogies were attached with a spring leaf and could be bent to make contact.  Contact of the bogies is needed 'cause that supplies electrical power to the bridge track.

A  trip to Lowes will solve the spring issue.

 

Was visited by Andy who's a member of the New York Society of Model Engineers.  Spent a goodly amount of time talking layouts and giving a cook's tour.  Got only one little thing done.

Bill has been busy with the scenery.

2019-04-06 0022019-04-06 005

Floodlights appeared in the roundhouse area.  Think we'll have enough illumination?

2019-04-06 0012019-04-06 004

Oh, that little thing done today.  Had cut a narrow strip on the curved portion of the added elevated section to allow for car overhang clearance on the ramp curve.  Planned to cover it with acoustic tile.  Was not needed so just added a shim to raise the end and middle of the strip to the level of the ramp.  Doesn't need tile for scenery.

2019-04-06 003

 

Attachments

Images (5)
  • 2019-04-06 002
  • 2019-04-06 005
  • 2019-04-06 001
  • 2019-04-06 004
  • 2019-04-06 003

Wow....I just discovered this thread and spent the last few hours reading the entire saga; fantastic!

The background mural is just awesome; your group was/is fortunate to have had such a great "artist in residence".

Question: you used Gargraves for the O gauge track; why did you not go with that same (terrific) brand for the S gauge loop? It can't be because of "brand loyalty", as I see you're now using a Lionel transformer... 

In any case, nice work and thank you for sharing this wonderful story.

Mark in (wet) Oregon

Strummer posted:

Wow....I just discovered this thread and spent the last few hours reading the entire saga; fantastic!

The background mural is just awesome; your group was/is fortunate to have had such a great "artist in residence".

Thank you, Strummer.  Not only am I an artist in residence, but I am also a club member.  It took quite a few man hours to work on the 80 foot long mural.  All that while I still work for a living for Wegmans.  It acted as a way of relaxing after a long week's work.  One of these days I'll use what I've learned to make a mural for MY layout.

Strummer - The reason we didn't use Gargraves track for the S-gauge is one of economics.  We already had American Flyer track.  The AF roadbed was gotten at a show very, very cheap; however it did need a lot of cleaning up.  We're using the Lionel KW transformer because the earlier AF 8B 100 watt transformer (can be seen in an earlier page)  didn't seem to hack it power wise.  We did buy one box of O-gauge Gargraves track at a good price.  The rest of the O-gauge track is either recycled from our old layout or from layouts the members were able to disassemble.  The Ross (and in one case Curtis) switches are recycled from our old layout.  Even the layout frame work is recycled from those disassembled layouts except for the upper level and ramps.  Those are made from purchased plywood.

Mark - Yup, may have to wear sun glasses when we power up those floodlights.  Gonna need a bigger transformer.

 

The KW transformer is going to be replaced with a donated Lionel RW 110 watt transformer that needs to be cleaned. 

As for the O gauge layout which encompasses about 30 club members, all our track was from the old layout and from layouts that we disassembled. Unlike our HO side of the club which accounts for about 8 club members, they bought about $2,000 worth of code 100 Atlas track. A slight disproportiate amount in club members. We really could use some more HO members who are interested in building and modeling the NY, LB railroad from the 1950's.

Yes, our scenery pro has been hard at work planting trees and shrubs if there is open space! 

Ted was busy framing and mounting several very nice pix taken by one of our ex-members.  Sorry, no pix, will have to rectify (wanted to get outta there with the rapid onset of a cold).  Plus, Ted lengthened the tracks in the roundhouse.  Area is now ready for final scenery (wiring will come later).  Anxious to the fire up the floodlights, especially for our Open House on May 4th and 5th.

Was busy adding the tile surface to the added elevated area in the northwest corner.  Didn't have much tile left but was able to "jig saw" what pieces we had.  Have to add a few more pieces, glue down and paint.  Final positioning of houses in that area is almost complete.

2019-04-14 001

Ted got a new toy at York, a C&O Berk.  He just had to try it out.  Sweet engine.  Great sounds.

2019-04-14 0042019-04-14 005

 

Attachments

Images (3)
  • 2019-04-14 001
  • 2019-04-14 004
  • 2019-04-14 005

Some pix from Tuesday's runnin'.

Bill dismounting from the layout after adding scenery to the background.  Watch out for those hoppers.

2019-04-23 001

Eric plaaacccciiinnngg his American Flyer UP passenger train headed by AA PAs on the S-Gauge loop.

2019-04-23 0032019-04-23 007

My Pennsy K4.

2019-04-23 0022019-04-23 008

Trial fitting of EZ-Streets for the trolley line on the northwest elevation.

2019-04-23 009

 

 

Attachments

Images (6)
  • 2019-04-23 001
  • 2019-04-23 003
  • 2019-04-23 007
  • 2019-04-23 002
  • 2019-04-23 008
  • 2019-04-23 009

Bill was trying for a double dismount in preparation for the senior olympics. Give Bill some open real estate and he will populate with trees, scenery and investment properties!

Eric was doing a soft landing there. Think those AF trains are a little smaller than the Jet Blue planes he lands on a regular basis. After running his passenger set, the track work held up nicely so we can proceed and permanently lay that track in place.

Bud still busy designing his operating park there adding a trolley line. Next up behind there will be our memorial park dedicating to members who are longer with us.

Ted, so you are telling me that both Bill and Eric are in traction in the local hospital right now????     And I don't mean street car type traction either!  

Kidding aside, all the work you gents are doing looks great!  I wish it wasn't so far away or I would come to see it all in person!  Many thanks to all for the photographs!  It's almost like being there!!!! 

Today the "glue crew", being myself and Jim cut 3 triangles of foam and glued them together on the corner pop up to raise the height of our upcoming memorial park for Captain Mike's Freehold Borough police dept., Denny's lawnmowers, Jonesey's used cars, Sven's train shop, need to figure what to do for Ernie and Alvin and a church with a hearst since we used to be located in the basement there.

Also glued down the ceiling tiles for Bud's upcoming action accessory area so we can paint the tiles, place the buildings, incorporate some EZ streets there with a trolley and wire up the action buildings. 

Not too much buildin'.  Mostly neatinin up for our Open House this weekend.

Some boat traffic being planned to go with the light house.

2019-04-27 002

Ted's new/old N&W J.

2019-04-30 001

Dave's CNJ RS3.

2019-04-30 002

Pair of SD45s that Tom repainted in PC livery.

2019-04-30 003

Stop by and visit us at our Open House this weekend May 4th and 5th from noon 'til    4 pm.  Check our website for directions.

See ya then.

 

Attachments

Images (4)
  • 2019-04-27 002
  • 2019-04-30 001
  • 2019-04-30 002
  • 2019-04-30 003

Some pix of our Open House this weekend.  Saturday's attendance was light,  Sunday's was a bit better.

O-Gauge.

2019-05-04 001 [2)2019-05-04 0022019-05-04 0032019-05-04 0042019-05-04 007

"And that...", Ted explaining to Armen from the Historical Museum.

2019-05-04 0142019-05-04 020

Solitude...wonder where they're going.

2019-05-05 0012019-05-05 004

Nick, on the left, our newest Junior member, a train expert who easily challenges the train knowledge of older members.  Sean, another Junior member, on the right.

2019-05-05 0082019-05-05 0092019-05-05 0102019-05-05 0112019-05-05 013

Tale of two Big Boys, one Premier the other RailKing.

2019-05-05 0172019-05-05 018

Smokin'.

2019-05-05 0192019-05-05 020

Take me to your leader or...just let me take your cow.

2019-05-05 021

Nick's train.

2019-05-05 0242019-05-05 0252019-05-05 026

Where's the subway?

2019-05-05 027

HO-Gauge.

Help.  I'm stuck and can't get out.

2019-05-04 0082019-05-04 015

Enrapt.

2019-05-05 0052019-05-05 015

Manning the raffle table...busy, busy, busy.

2019-05-05 016

 

Attachments

Images (28)
  • 2019-05-04 001 (2)
  • 2019-05-04 002
  • 2019-05-04 003
  • 2019-05-04 004
  • 2019-05-04 007
  • 2019-05-04 014
  • 2019-05-04 020
  • 2019-05-05 001
  • 2019-05-05 004
  • 2019-05-05 008
  • 2019-05-05 009
  • 2019-05-05 010
  • 2019-05-05 011
  • 2019-05-05 013
  • 2019-05-05 017
  • 2019-05-05 018
  • 2019-05-05 019
  • 2019-05-05 020
  • 2019-05-05 021
  • 2019-05-05 024
  • 2019-05-05 025
  • 2019-05-05 026
  • 2019-05-05 027
  • 2019-05-04 008
  • 2019-05-04 015
  • 2019-05-05 005
  • 2019-05-05 015
  • 2019-05-05 016

Ballasting was done in the roundhouse area.  Next will be powering the floodlights.

2019-05-11 0012019-05-11 0022019-05-11 003

The surface of the elevated area in the northwest corner was painted.

2019-05-11 004

We did trouble shooting on TIU 1 used on tracks 1 and 2 by connecting TIU 2 to tracks 1 and 2.  TIU 2 is used on tracks 3 and 4.  DCS worked with TIU 2 on tracks 1 and 2.   Looks like TIU 1 is toast and will need to be replaced.  In an earlier part of the thread, trouble shooting found that TIU 1's fixed output for track 2 had shorted and we switched to the variable output but that did not work either.  Haven't been able to use DCS on tracks 1 and 2 because of this.  We also have Remote Kommanders connected on tracks 1 and 2.  Wasn't able to try them with the TIU 2 setup since we didn't have a DCS engine set to factory reset.  MTH says that they will work when both are connected but not to be used at the same time.  We operated both when TIU 1 was working.

 

Attachments

Images (4)
  • 2019-05-11 001
  • 2019-05-11 002
  • 2019-05-11 003
  • 2019-05-11 004

Yep, the painting and ballasting crew (me) was busy at work yesterday so we can start wiring up the MTH operating accessories. The tracks by the roundhouse were ballasted and Elmer's glue sprayed to harden that down. 

Bill was busy planting more shrubbery and putting blue matting down underneath our Atlas bridge. I think water belongs under a bridge!

The layout designer/master was busy playing with his TIU's and the professor came to the conclusion that TIU 1 is fried beyond recognition!

Next Thursday we have a club visit from the South Knolls, Jackson, NJ car club where I live.

At our Business Meeting this past Tuesday, treasurer Frank presented a Lionel Bar Stool to our past President Dennis in appreciation for the many years he had to put up with us as President.

2019-05-14 001

Then we celebrated by running trains.

Tom's repainted E7 in NJ Transit colors.

2019-05-14 005

Doug's Santa Fe and Dennis' AMTRAK  rounding the roundhouse curve.

2019-05-14 007

Dennis' AMTRAK rounding our horseshoe curve hauling the mail.  Tom in the "back" ground.

2019-05-14 009

My Pennsy K4 on the hi-line.  Tony's NJT to the side.

2019-05-14 012

Who's going where?

2019-05-14 013

Doug running more of his vintage AF and praying that all the operating hopper cars stay connected.

2019-05-14 014

 

Attachments

Images (7)
  • 2019-05-14 001
  • 2019-05-14 005
  • 2019-05-14 007
  • 2019-05-14 009
  • 2019-05-14 012
  • 2019-05-14 013
  • 2019-05-14 014

Pics from the visit by the South Knolls Car Club.

2019-05-16 0012019-05-16 0032019-05-16 0042019-05-16 0062019-05-16 007

Oops.  Thought I had placed by Cab-1 securely on the layout.  It fell to the floor and shattered the outer covering of the "rubber ducky" antenna that I had installed (so much for "flexibility").  Will probably cover the exposed antenna with heat shrink unless I find the original antenna and reinstall that.

2019-05-16 008

 

Attachments

Images (6)
  • 2019-05-16 001
  • 2019-05-16 003
  • 2019-05-16 004
  • 2019-05-16 006
  • 2019-05-16 007
  • 2019-05-16 008

Update to our MTH TIU issues:

We ordered the new TIU and Wifi package, had our TIU which was thought to be bad being repaired and having everything updated to tbe latest version by our local MTH repair person, All Aboard Trains in Barnegat,NJ who I highly recommend using for MTH repairs.

Hooked everything up on Thursday with the help of our junior member, Sean, who helped wire up the TIU's and Wifi to the layout. Installed those into the remotes and got Wifi operating in my phone. Amazing how these younger guys know this stuff!

All 4 lines worked perfectly with the remotes and the MTH Wifi system performed GREAT via my IPhone SE. I am sold on Wifi and don't need the competitor's wifi. MTH system runs it all. Good job, MTH.

Pictures to follow when Bud gets down to the club with his roving camera.

Last edited by Ted Bertiger

As promised while Bud has been nursing his wife's fractured arm, we have done plenty without the professor's supervision. Plenty indeed! We've been busy.

Glued addtional building fronts to the walls with liquid nails and some wooden supports to hold them in place. Check out the skyscraper's left support beam to keep it from becoming the Leaning Tower of Lakewood, NJ! 

Our American Flyer Army Lieutenant Colonel, Doug, has been busy acquiring real estate for our S gauge addtion and started to spread his wings with a switch siding. Makes sense to stage the AF trains there than climbing on the layout. Also, we cut a nice "to be" lift up hatch and re-designed the EZ streets to circumvent inside the AF loop. More work to follow.

IMG_0329IMG_0330IMG_0331

Attachments

Images (3)
  • IMG_0329
  • IMG_0330
  • IMG_0331

Today the O gauge building crew was at work putting up some urban development neighborhoods along our elevated trestle system. The skyscrapers have LED lighting so wiring them next.

A little glue here and there with temporary wooden reinforcement till the footings took hold!! The rock wall paper cut to proper lengths and elmer glued to the walls.

There is a picture of the S Gauge spur in its building process encroaching space over the O gauge lines! Give Doug some space and now spreading the wealth.

IMG_0336IMG_0335IMG_0337

Attachments

Images (3)
  • IMG_0336
  • IMG_0335
  • IMG_0337
Last edited by Ted Bertiger

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×