Skip to main content

Brody,  I got a big kick out of your map of Fort Wayne's Lawton Park/ Fourth Street / Clinton Street area.  You show the route how the NKP 767 was moved across the street and onto live rail.  It is a pretty good representation of how that happened.  As a surveyor (then) and one of the original board members of the Fort Wayne Railroad Historical Society, Inc., it fell to me to figure out how to get the locomotive across the street.  Fourth Street was a minor street so it was no big deal to close it for about 8 hours.  Lost in the reporting is the fact that the return to service of NKP 759 in 1968-1973 was the inspiration that it was indeed possible to bring a mainline steam locomotive back from "the dead".  Up until that time, all mainline steam was still an "extension" of locomotives that were never really retired, like the CN 6218, UP 8444, RDG 4-8-4's, Burlington steam, and even Southern 4501- out of service for two years between the K&T and Paul Merriman.  NKP 759 was out of service from 1958-1968, a full decade.  So it was the first one to be brought back from the grave and the second one was the Daylight 4449 in 1975 after nearly twenty years.  The 765/767 was brought back from the grave after 21 years.  It is hard to believe that it is now 38 years since the 765 began her second career.  

Yep.  I don't know how long it lasted, but there was a panel by the cylinders on the engineer's side that had the button to rotate the drivers on the 2903. The locomotive was lifted ever so slightly off the rails.

Standing inches away from all that machinery in motion is something not easily forgotten.

I also remember the operating display inside, by a west wall near the Pennsy cab.

As I said, this was the 1970's when I was there.  I would guess the first time it broke down was the last time it broke down and was removed.

Rusty

Last edited by Rusty Traque
Rusty Traque posted:

Yep.  I don't know how long it lasted, but there was a panel by the cylinders on the engineer's side that had the button to rotate the drivers on the 2903. The locomotive was lifted ever so slightly off the rails.

Standing inches away from all that machinery in motion is something not easily forgotten.

I also remember the operating display inside, by a west wall near the Pennsy cab.

As I said, this was the 1970's when I was there.  I would guess the first time it broke down was the last time it broke down and was removed.

Rusty

Well, that is very interesting. I have been going to the museum since the early 70's, but I was a little kid. Seeing the drivers of the "inside" engine move were pretty cool, but seeing the massive drivers of the 2903 must have been something to, especially since you could view the motion so close.

Funny you should mention the PRR K4 cab, that was also sold along with the C&EI demo unit mentioned earlier as well as some of the other small engines. Some were original and some were reproductions from many years ago.

Charlie

NKP779 posted:

Brody,  I got a big kick out of your map of Fort Wayne's Lawton Park/ Fourth Street / Clinton Street area.  You show the route how the NKP 767 was moved across the street and onto live rail.  It is a pretty good representation of how that happened.  As a surveyor (then) and one of the original board members of the Fort Wayne Railroad Historical Society, Inc., it fell to me to figure out how to get the locomotive across the street.  Fourth Street was a minor street so it was no big deal to close it for about 8 hours.    

I guess you can further thank Kelly Lynch because I got my information from Listen For The Whistle. All I did was draw on a Google Maps screenshot.

Rusty Traque posted:

Yep.  I don't know how long it lasted, but there was a panel by the cylinders on the engineer's side that had the button to rotate the drivers on the 2903. The locomotive was lifted ever so slightly off the rails.

Standing inches away from all that machinery in motion is something not easily forgotten.

I also remember the operating display inside, by a west wall near the Pennsy cab.

As I said, this was the 1970's when I was there.  I would guess the first time it broke down was the last time it broke down and was removed.

Rusty

Sad to have missed that. Seeing the 2903 cosmetically restored at the museum with moving running gear would be spectacular. As with all museums, guests are at the mercy of current and past curators. While many do not like the loss of train items, at least this museum has sold items at auction to all for the highest bid and ensures transparency of the sales. Sadly some do not, having instead "tent sales" and such for locals, which is not the way to get the most money for items.

Last edited by BobbyD
Firewood posted:

There was an appeal a few years ago for about $500,000 to give 6218 her first face-lift in years. I think that's all you're going to see in the restoration direction.

http://www.trha.ca/2010/03/for...toration-of-cnr.html

http://fess.dsbn.org/docs/guid...rochure.pdf?sfvrsn=0

I feel the overall climate for steam locomotives in North America is becoming slowly un-friendly. As the knowledge base slowly shrinks, and the corporate boardroom friendliness evaporates, the steamers will slowly be parked. There are bright lights, and we all know them, but in general mainline railroad steam will become a too-expensive, too-bureaucratic, insurance-nightmarish morass.

The possibility of static displays being restored to low pressure steam operation is possible, but there might be an alternative. I think for our future generations to see the BIG steam locomotive experience up close, the Disney / movie effects / engineering interpretation approach is an option. Mechanical restoration and hydraulic operation of key components in animated displays has been done. The Cruquius steam pump museum in the Netherlands is a wonderful example of old steam technology preservation. The engine/pump is fully operational through custom-designed modern hydraulics. The option of full steam restoration wasn't an option, so no operating boilers. I think that's the key to future museum locomotives. No mainline operation, and no live boiler to horrify the insurance executives - but make it alive somehow, and capture the viewer's imagination. Just my $0.02's worth or less.

I hope you are wrong about that. It would be a sad day indeed if steam locomotives were no longer running.

645 posted:

Brody - looks like the city of Fort Erie is going to step up and stabilize / start restoring 6218 now:

https://www.niagarathisweek.co...toration-of-cn-6218/

Also take note that the Alberta Railway Museum was willing to take 6218 away to be restored including picking up the shipping costs.

So looks like 6218 will be staying in Canada so you can look for a new engine to rescue. NKP 624 may be a good one for you to get involved with since it went to FWRHS so will be handy for you being a local member of that organization. They also have NKP SD9 358 which is currently undergoing restoration.

Promising news!  The only thing that grates me about that article is how someone can't bother to do some basic research on a steam locomotive: "Its engine is cracked open and spewing iron and rust", things like that.

That's annoying.

Last edited by Eddie Marra

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×