Skip to main content

I just started working with this neat program, but have hit a snag even after watching the tutorials. I am changing my table plan to fit a bay window with a single pad based on 4'x8' Thus the non-standard shape of the platform.  Seems this should be simple, but I'm struggling.  First, I need a 16" square "hole" in the middle of the layout for a tree stand.  That keeps me from putting track there, right?  Then I'd like to run a second train O27 in the middle of the Fastrak design, perhaps elevated, all leaving me space for the necessary trees, houses, and hot chocolate.  The Fastrak plan is pretty boring for sure, but I don't have the "vision" and experience to make the layout more interesting.  Took me half and hour to close the loop properly. Is there a way to run the Fastrak under the O27? The board would be two pieces butted together for lifting and storage.  I appreciate your thoughts and critique of what the basic plan is.  Ted

Attachments

Last edited by TedW
Original Post

Replies sorted oldest to newest

Hi Ted, no plan is boring, especially with two trains.

I did the following; I added 2 O-27 switches, make sure to get the non-derailing versions. This way you can leave it unattended and on the turn the O-27 train will run opposing the FasTrack train (which I think looks cool). It does require 2 custom cut pieces (highlighted in green). But O-27 is the easiest to cut ever.

For the FasTrack I added a passing siding that is long enough for a starter set. So you could have a train waiting on the siding, pointing in the opposite way of the other and have quite a bit of variety. There is an error in SCARM for FasTrack with the O-31 switches, so you must have the 1 3/8 piece always connected to the O-31 switches until it is corrected in SCARM (highlighted in yellow).

I also added your 16 inch square in the middle. Let me know what you think or if you have questions.

test5twilson1-5-17a-3Dtest5twilson1-5-17a

Attachments

Images (2)
  • test5twilson1-5-17a-3D
  • test5twilson1-5-17a
Files (1)
Last edited by AtoZ Lewis

See, this is what I'm talkin about.  Someone with some skilllz to show me the path.  This is great!!    And, uses about every bit of space available. There's two small sections next switches, I presume those are the 1 3/8 pieces required. On the ipad now so hope I can go to laptop, download and open the change to get some details. Thanks so much for the help, Mike. I truly appreciate it. Ted

Your welcome!

You wont need to buy the 1 3/8 pieces, they are already built into the switch. Lionel confused everyone (including their own printing department) and originally listed the O-31 at 10 inches straight, but it is really 11 3/8 straight. So in SCARM we have to add the piece for now, but it will get updated soon. The spacing is tight but as long as you center it up when building you'll have a little more than 4 inches (center to center) in those O-27 curves so nothing should bump.

Have fun.

Got some new O27 track in for initial/test fit. Need to get the bench work started. Am seriously considering foam board, understanding those who feel safety might be an issue. If I go that route is minimum 2" thick required. With no underlay?  Think square honeycomb 1"x6" to lay foam on. Want it high cause of dog.  More fastrak is due in a day or so. And some woodland scenic buildings by next week. Been studying the videos on snow scenes. Would like to make a 2 enter and 3 exit tunnel in upper right corner. To much?  TW

Attachments

Images (3)
  • IMG_2863
  • IMG_2864
  • IMG_0673

Doing some track test fit. The tolerances are pretty close, but make it. Got some help with the 242 scout through the switches but works pretty well right now.  Got the base built and foam board. Will start scenery next. My cow town is really low on supplies. Have to order darn near everything direct.  Any suggestions are always welcome.  TW

Attachments

Images (2)
  • Base for foam board
  • Layout
Videos (1)
operation

Looks great! Wow that will be high off the floor. I didn't realize what you meant by honeycomb until I saw the picture. Will you cut that into modules as well? If you do make sure to add some 90 degree angle brackets in the corners to hold it's strength. Is the tree going to sit on top of all of this? I hope your ceiling is high!

Yeah, need it high for the dog.  Any lower n she just lumbers up or through the layout. (Oh dee doe duh whut?). Shes too much. She likes to look out the bay window. Tore up three cars last xmas when layout was on floor.  7' tree will fit easy, the base will only be used for this layout.  The boards are all slotted so they just drop into each other on the floor.  Takes about 45 sec to set up.  Thinking I will stain and finish a 1x8 as a faus front and short sides to dress up the look.  Later TW

Carl, yup, I follow his thread. Packed a bunch of stuff into a small space. I see your point about the passing siding and agree, it could be used for another train. If I had another one.   I have a couple Menard's cars I'll park there.  Have a lot of plans and time. But my first venture, so there will be lots of mistakes I'm sure. I'll take any advice given. Ted

Moonman posted:

very nice result, Ted!

I like the tunnel crew...actually I enjoy all of the detail that you put into this layout.

Is the passing siding live or did you employ a power cutoff?

Thanks for the posting the photos!

It’s live Carl.  I use it for a static display of passenger cars with converted lighting to led in front of the little station platform.  I don’t think using it this way I will run into trouble, at least not yet anyway.  I developed a dodgy switch on the left and with the ballasting too much trouble to figure out why.  Shorts out for some reason when a roller goes through on the turnout.  Should have listened to you...  

77D324BA-14C3-47C2-AC73-85DF08574F1C

 

Attachments

Images (1)
  • 77D324BA-14C3-47C2-AC73-85DF08574F1C
AtoZ Lewis posted:

Thanks for the call out, you really took the scenery to another level. I'd enjoy seeing a picture when the tree gets added too!

I'll have to re-read, but wasn't another objective to divide this into two pieces for relocation? Did that work? Maybe that was another plan.

You are right, two pieces.  But decided against it because I didn’t like the separation idea I came up with, and, joining them back together was cumbersome at best. I’ll have help getting it out of the basement to the family room.  Will work out just fine.  Thx again for the track plan.  Ted

Put a bow on it.  It’s over for Xmas 2017.  Here’s the final look.  Thanks everybody for your help, I truly appreciate it.  BTW, I didn’t put it there, but I Just noticed today the layout info and pics are on the SCARM site. scarm.info/layouts/track_plans  Not sure how that happens.  TW

C8458139-00DF-4BAD-ACC0-2AE58243B58F

FE1D6D6A-A725-4A35-92F8-DA131A89D50F

 

 

Attachments

Images (2)
  • C8458139-00DF-4BAD-ACC0-2AE58243B58F
  • FE1D6D6A-A725-4A35-92F8-DA131A89D50F
Videos (2)
7A9920C8-0DF3-465D-B5F2-6265E8E47F3A
53A8BC3C-CB0F-406E-9E9C-FA01C625EE2A
Last edited by TedW

Add Reply

Post
The Track Planning and Layout Design Forum is sponsored by

AN OGR FORUM CHARTER SPONSOR

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×