Skip to main content

Replies sorted oldest to newest

Railfan Brody posted:

I have a question or two about the SP oil cans on the Tehachapi Loop. One, why were the tankers connected by hose and was there an oil flow between the middle DPUs?

Those are NOT "DPUs", but maned mid-train helpers (the Engineer is plainly visible in the cab with the window open and his arm hanging out). No, there would be no hose connected around the mid-train helpers. Once the mid-train helpers were removed, the train would then be spotted for loading/unloading.

Second, and finally, why weren't there spacer cars used? Was that not yet a federal law?

Correct, no requirement for "buffer cars" back then (video dated 1995).

 

 

Hot Water posted:
Railfan Brody posted:

I have a question or two about the SP oil cans on the Tehachapi Loop. One, why were the tankers connected by hose and was there an oil flow between the middle DPUs?

Those are NOT "DPUs", but maned mid-train helpers (the Engineer is plainly visible in the cab with the window open and his arm hanging out). No, there would be no hose connected around the mid-train helpers. Once the mid-train helpers were removed, the train would then be spotted for loading/unloading.

So, I have the Santa Fe Odyssey dvd, and in one scene, there was a crew change at Marceline, and at least two of the locomotives were crewed. Was each locomotive INDIVIDUALLY controlled?

Second, and finally, why weren't there spacer cars used? Was that not yet a federal law?

Correct, no requirement for "buffer cars" back then (video dated 1995).

 

 

Crew Change at 3:41.

 

Railfan Brody posted:
Hot Water posted:
Railfan Brody posted:

I have a question or two about the SP oil cans on the Tehachapi Loop. One, why were the tankers connected by hose and was there an oil flow between the middle DPUs?

Those are NOT "DPUs", but maned mid-train helpers (the Engineer is plainly visible in the cab with the window open and his arm hanging out). No, there would be no hose connected around the mid-train helpers. Once the mid-train helpers were removed, the train would then be spotted for loading/unloading.

So, I have the Santa Fe Odyssey dvd, and in one scene, there was a crew change at Marceline, and at least two of the locomotives were crewed. Was each locomotive INDIVIDUALLY controlled?

Second, and finally, why weren't there spacer cars used? Was that not yet a federal law?

Correct, no requirement for "buffer cars" back then (video dated 1995).

 

 

Crew Change at 3:41.

 

 

Most likely a deadhead crew, riding the trailing unit/units.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×